{"title":"Turbosmart - Internal Wastegates","description":null,"products":[{"product_id":"nstparts-turbosmart-iwg75-twin-port-universal-wastegate-actuator-unf-14psi","title":"Turbosmart IWG75 Twin-Port Universal Wastegate Actuator (UNF) 14psi","description":"\u003cp\u003eTurbosmart Upgraded Wastegate Actuators have been developed to provide maximum possible boost response for your factory frame turbocharger. The Turbosmart IWG75 Series of upgraded Actuators benefit from an increased Working Ratio over the factory equipment resulting in improved boost response, throughout the RPM range.\u003c\/p\u003e\n\u003cp\u003eThis Improved working ratio is achieved through an increase to the effective surface area of the diaphragm \u0026amp; revisions to the actual springs fitted resulting in greater leverage of the forces the actuator is working against (boost and backpressure) while still being super-responsive.Â\u003c\/p\u003e\n\u003cp\u003eUpgrading with the same base pressure as factory, you can expect a broader boost \u0026amp; torque curve through peak boost being achieved earlier in the RPM and being held longer, into higher RPM. These improvements can be amplified with higher base pressures, however tuning \u0026amp; recalibration is likely required.\u003c\/p\u003e\n\u003cp\u003eTwin Port Actuators allow for a wider tuning window by plumbing a reference signal either side of the diaphragm, the boost control strategy can force the pressure into the top cap for a higher high boost target and equally, force pressure under the diaphragm, for a lower low boost target. Twin Port Control allows for greater boost control options around the base spring pressure. Often a much softer spring than usual can be used, resulting in an overall improvement in dynamics and response.\u003c\/p\u003e\n\u003cp\u003eFeatures\u003c\/p\u003e\n\u003cp\u003eProprietary Silicon Nomex Diaphragm\u003c\/p\u003e\n\u003cp\u003eChoice of Springs from 3psi to 26psi (Optional)\u003c\/p\u003e\n\u003cp\u003eHigh Grade Billet Aluminum Construction\u003c\/p\u003e\n\u003cp\u003eStainless Steel Rods and Clevis\u003c\/p\u003e\n\u003cp\u003eTurbosmart Unique Locking Collar System\u003c\/p\u003e\n\u003cp\u003eThis is a Universal Twin Port IWG75 Actuator supplied with a 1\/4 UNF thread for fitment on a wide variety of turbochargers. Some fabrication is likely required, including additional hardware such as clevis and brackets.\u003c\/p\u003e","brand":"Turbosmart","offers":[{"title":"Default Title","offer_id":68436462534898,"sku":"TS-0681-6142","price":341.86,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0632\/3201\/6626\/files\/media_6e6fc56c-420c-4a96-8d12-01f25400b6a9.jpg?v=1793778549"},{"product_id":"nstparts-turbosmart-iwg75-twin-port-wastegate-actuator-borg-warner-efr-b2-single-twin-scroll-14psi","title":"Turbosmart IWG75 (Twin Port) Wastegate Actuator Borg Warner EFR B2 Single\/Twin Scroll 14psi","description":"\u003cp\u003eTurbosmart Upgraded Wastegate Actuators have been developed to provide maximum possible boost response for your factory frame turbocharger. The Turbosmart IWG75 Series of upgraded Actuators benefit from an increased Working Ratio over the factory equipment resulting in improved boost response, throughout the RPM range.\u003c\/p\u003e\n\u003cp\u003eThis Improved working ratio is achieved through an increase to the effective surface area of the diaphragm \u0026amp; revisions to the actual springs fitted resulting in greater leverage of the forces the actuator is working against (boost and backpressure) while still being super-responsive.Â\u003c\/p\u003e\n\u003cp\u003eUpgrading with the same base pressure as factory, you can expect a broader boost \u0026amp; torque curve through peak boost being achieved earlier in the RPM and being held longer, into higher RPM. These improvements can be amplified with higher base pressures, however tuning \u0026amp; recalibration is likely required.\u003c\/p\u003e\n\u003cp\u003eTwin Port Actuators allow for a wider tuning window by plumbing a reference signal either side of the diaphragm, the boost control strategy can force the pressure into the top cap for a higher high boost target and equally, force pressure under the diaphragm, for a lower low boost target. Twin Port Control allows for greater boost control options around the base spring pressure. Often a much softer spring than usual can be used, resulting in an overall improvement in dynamics and response.\u003c\/p\u003e\n\u003cp\u003eFeatures\u003c\/p\u003e\n\u003cp\u003eProprietary Silicon Nomex Diaphragm\u003c\/p\u003e\n\u003cp\u003eChoice of Springs from 3psi to 26psi (Optional)\u003c\/p\u003e\n\u003cp\u003eHigh Grade Billet Aluminum Construction\u003c\/p\u003e\n\u003cp\u003eStainless Steel Rods and Clevis\u003c\/p\u003e\n\u003cp\u003eTurbosmart Unique Locking Collar System\u003c\/p\u003e\n\u003cp\u003eThis is a bolt on fitment for the Borg Warner EFR B2 Single and Twin Scroll turbocharger series.\u003c\/p\u003e","brand":"Turbosmart","offers":[{"title":"Default Title","offer_id":68436462829810,"sku":"TS-0620-3143","price":341.86,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0632\/3201\/6626\/files\/media_fd7aa2d4-644f-451d-a52e-2cf918699b04.jpg?v=1793778550"},{"product_id":"nstparts-turbosmart-iwg75-universal-actuator-unf-150mm-7psi","title":"Turbosmart IWG75 Universal Actuator (UNF) 150mm 7PSI","description":"\u003cp\u003eTurbosmart Upgraded Wastegate Actuators have been developed to provide maximum possible boost response for your factory frame turbocharger. The Turbosmart IWG75 Series of upgraded Actuators benefit from an increased 'Working Ratio' over the factory equipment resulting in improved boost response, throughout the RPM range.\u003c\/p\u003e\n\u003cp\u003eThis Improved 'working ratio' is achieved through an increase to the effective surface area of the diaphragm \u0026amp; revisions to the actual springs fitted resulting in greater leverage of the forces the actuator is working against (boost and backpressure) while still being super-responsive.\u003c\/p\u003e\n\u003cp\u003eUpgrading with the same base pressure as factory, you can expect a broader boost \u0026amp; torque curve through peak boost being achieved earlier in the RPM and being held longer, into higher RPM. These improvements can be amplified with higher base pressures, however tuning \u0026amp; recalibration is likely required.\u003c\/p\u003e\n\u003cp\u003eAvailable In\u003c\/p\u003e\n\u003cp\u003eTwin Port Universal (UNF) 14psi \/ 1.0 BAR: TS-0681-6142\u003c\/p\u003e\n\u003cp\u003eSingle Port Universal (UNF) 14psi \/ 1.0 BAR: TS-0681-5142\u003c\/p\u003e\n\u003cp\u003eSingle Port Universal (UNF) 10psi \/ 0.7 BAR: TS-0681-5102\u003c\/p\u003e\n\u003cp\u003eSingle Port Universal (UNF) 7psi \/ 0.5 BAR: TS-0681-5072\u003c\/p\u003e\n\u003cp\u003eSingle Port Universal (M6) 10psi \/ 0.7 BAR: TS-0681-4102\u003c\/p\u003e\n\u003cp\u003eFeatures\u003c\/p\u003e\n\u003cp\u003eProprietary Silicon Nomex Diaphragm\u003c\/p\u003e\n\u003cp\u003eChoice of Springs from 3psi to 26psi (Optional)\u003c\/p\u003e\n\u003cp\u003eHigh Grade Billet Aluminum Construction\u003c\/p\u003e\n\u003cp\u003eStainless Steel Rods and Clevis\u003c\/p\u003e\n\u003cp\u003eTurbosmart Unique Locking Collar System\u003c\/p\u003e\n\u003cp\u003eThis is a Universal Single Port IWG75 Actuator supplied with a 100mm long M6 thread for fitment on a wide variety of turbochargers. Some fabrication is likely required, including additional hardware such as clevis and brackets.\u003c\/p\u003e","brand":"Turbosmart","offers":[{"title":"Default Title","offer_id":68436464992498,"sku":"TS-0681-5072","price":275.69,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0632\/3201\/6626\/files\/media_6dc70993-d463-40aa-be90-ff7d556a3d35.jpg?v=1793778551"},{"product_id":"nstparts-turbosmart-iwg75-universal-wastegate-actuator-unf-150mm-10psi","title":"Turbosmart IWG75 Universal Wastegate Actuator (UNF) 150mm 10psi","description":"\u003cp\u003eTurbosmart Upgraded Wastegate Actuators have been developed to provide maximum possible boost response for your factory frame turbocharger. The Turbosmart IWG75 Series of upgraded Actuators benefit from an increased Working Ratio over the factory equipment resulting in improved boost response, throughout the RPM range.\u003c\/p\u003e\n\u003cp\u003eThis Improved working ratio is achieved through an increase to the effective surface area of the diaphragm \u0026amp; revisions to the actual springs fitted resulting in greater leverage of the forces the actuator is working against (boost and backpressure) while still being super-responsive.Â\u003c\/p\u003e\n\u003cp\u003eUpgrading with the same base pressure as factory, you can expect a broader boost \u0026amp; torque curve through peak boost being achieved earlier in the RPM and being held longer, into higher RPM. These improvements can be amplified with higher base pressures, however tuning \u0026amp; recalibration is likely required.\u003c\/p\u003e\n\u003cp\u003eFeatures\u003c\/p\u003e\n\u003cp\u003eProprietary Silicon Nomex Diaphragm\u003c\/p\u003e\n\u003cp\u003eChoice of Springs from 3psi to 26psi (Optional)\u003c\/p\u003e\n\u003cp\u003eHigh Grade Billet Aluminum Construction\u003c\/p\u003e\n\u003cp\u003eStainless Steel Rods and Clevis\u003c\/p\u003e\n\u003cp\u003eTurbosmart Unique Locking Collar System\u003c\/p\u003e\n\u003cp\u003eThis is a Universal Single Port IWG75 Actuator supplied with a 150mm long 1\/4 UNF thread for fitment on a wide variety of turbochargers. Some fabrication is likely required, including additional hardware such as clevis and brackets.\u003c\/p\u003e","brand":"Turbosmart","offers":[{"title":"Default Title","offer_id":68436465877234,"sku":"TS-0681-5102","price":275.69,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0632\/3201\/6626\/files\/media_2fd78ce8-dfec-4e45-8f5c-9aa7cb6a04c8.jpg?v=1793778553"},{"product_id":"nstparts-turbosmart-iwg75-universal-wastegate-actuator-unf-150mm-14psi","title":"Turbosmart IWG75 Universal Wastegate Actuator (UNF) 150mm 14psi","description":"\u003cp\u003eTurbosmart Upgraded Wastegate Actuators have been developed to provide maximum possible boost response for your factory frame turbocharger. The Turbosmart IWG75 Series of upgraded Actuators benefit from an increased Working Ratio over the factory equipment resulting in improved boost response, throughout the RPM range.\u003c\/p\u003e\n\u003cp\u003eThis Improved working ratio is achieved through an increase to the effective surface area of the diaphragm \u0026amp; revisions to the actual springs fitted resulting in greater leverage of the forces the actuator is working against (boost and backpressure) while still being super-responsive.Â\u003c\/p\u003e\n\u003cp\u003eUpgrading with the same base pressure as factory, you can expect a broader boost \u0026amp; torque curve through peak boost being achieved earlier in the RPM and being held longer, into higher RPM. These improvements can be amplified with higher base pressures, however tuning \u0026amp; recalibration is likely required.\u003c\/p\u003e\n\u003cp\u003eFeatures\u003c\/p\u003e\n\u003cp\u003eProprietary Silicon Nomex Diaphragm\u003c\/p\u003e\n\u003cp\u003eChoice of Springs from 3psi to 26psi (Optional)\u003c\/p\u003e\n\u003cp\u003eHigh Grade Billet Aluminum Construction\u003c\/p\u003e\n\u003cp\u003eStainless Steel Rods and Clevis\u003c\/p\u003e\n\u003cp\u003eTurbosmart Unique Locking Collar System\u003c\/p\u003e\n\u003cp\u003eThis is a Universal Single Port IWG75 Actuator supplied with a 150mm long 1\/4 UNF thread for fitment on a wide variety of turbochargers. Some fabrication is likely required, including additional hardware such as clevis and brackets.\u003c\/p\u003e","brand":"Turbosmart","offers":[{"title":"Default Title","offer_id":68436466467058,"sku":"TS-0681-5142","price":275.69,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0632\/3201\/6626\/files\/media_57670ec2-71fd-4dc4-b1fe-4bfdba72326f.jpg?v=1793778554"},{"product_id":"nstparts-turbosmart-iwg75-wastegate-actuator-ford-xr6-actuator-12psi","title":"Turbosmart IWG75 Wastegate Actuator Ford XR6 Actuator 12psi","description":"\u003cp\u003eTurbosmart Upgraded Wastegate Actuators have been developed to provide maximum possible boost response for your factory frame turbocharger. The Turbosmart IWG75 Series of upgraded Actuators benefit from an increased Working Ratio over the factory equipment resulting in improved boost response, throughout the RPM range.\u003c\/p\u003e\n\u003cp\u003eThis Improved working ratio is achieved through an increase to the effective surface area of the diaphragm \u0026amp; revisions to the actual springs fitted resulting in greater leverage of the forces the actuator is working against (boost and backpressure) while still being super-responsive.Â\u003c\/p\u003e\n\u003cp\u003eUpgrading with the same base pressure as factory, you can expect a broader boost \u0026amp; torque curve through peak boost being achieved earlier in the RPM and being held longer, into higher RPM. These improvements can be amplified with higher base pressures, however tuning \u0026amp; recalibration is likely required.\u003c\/p\u003e\n\u003cp\u003eFeatures\u003c\/p\u003e\n\u003cp\u003eProprietary Silicon Nomex Diaphragm\u003c\/p\u003e\n\u003cp\u003eChoice of Springs from 3psi to 26psi (Optional)\u003c\/p\u003e\n\u003cp\u003eHigh Grade Billet Aluminum Construction\u003c\/p\u003e\n\u003cp\u003eStainless Steel Rods and Clevis\u003c\/p\u003e\n\u003cp\u003eTurbosmart Unique Locking Collar System\u003c\/p\u003e\n\u003cp\u003eNotes\u003c\/p\u003e\n\u003cp\u003eThe 5psi Version is a direct replacement for the factory item. All other versions will require tuning \/ calibration of your engines ECU.\u003c\/p\u003e\n\u003cp\u003eThis is a bolt on fitment for the GT3582R turbocharger as fitted to the Ford 4.0L DOHC Turbo Barra motor in Australian Delivered Ford Falcon and Territory.\u003c\/p\u003e","brand":"Turbosmart","offers":[{"title":"Default Title","offer_id":68436475248882,"sku":"TS-0622-1122","price":275.69,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0632\/3201\/6626\/files\/media_c5bfeef0-09c0-4e01-be63-d5cf85b9157d.jpg?v=1793778555"},{"product_id":"nstparts-turbosmart-iwg75-wastegate-actuator-suit-ford-xr6-actuator-5psi","title":"Turbosmart IWG75 Wastegate Actuator Suit Ford XR6 Actuator 5psi","description":"\u003cp\u003eTurbosmart Upgraded Wastegate Actuators have been developed to provide maximum possible boost response for your factory frame turbocharger. The Turbosmart IWG75 Series of upgraded Actuators benefit from an increased Working Ratio over the factory equipment resulting in improved boost response, throughout the RPM range.\u003c\/p\u003e\n\u003cp\u003eThis Improved working ratio is achieved through an increase to the effective surface area of the diaphragm \u0026amp; revisions to the actual springs fitted resulting in greater leverage of the forces the actuator is working against (boost and backpressure) while still being super-responsive.Â\u003c\/p\u003e\n\u003cp\u003eUpgrading with the same base pressure as factory, you can expect a broader boost \u0026amp; torque curve through peak boost being achieved earlier in the RPM and being held longer, into higher RPM. These improvements can be amplified with higher base pressures, however tuning \u0026amp; recalibration is likely required.\u003c\/p\u003e\n\u003cp\u003eFeatures\u003c\/p\u003e\n\u003cp\u003eProprietary Silicon Nomex Diaphragm\u003c\/p\u003e\n\u003cp\u003eChoice of Springs from 3psi to 26psi (Optional)\u003c\/p\u003e\n\u003cp\u003eHigh Grade Billet Aluminum Construction\u003c\/p\u003e\n\u003cp\u003eStainless Steel Rods and Clevis\u003c\/p\u003e\n\u003cp\u003eTurbosmart Unique Locking Collar System\u003c\/p\u003e\n\u003cp\u003eNotes\u003c\/p\u003e\n\u003cp\u003eThe 5psi Version is a direct replacement for the factory item. All other versions will require tuning \/ calibration of your engines ECU.\u003c\/p\u003e\n\u003cp\u003eThis is a bolt on fitment for the GT3582R turbocharger as fitted to the Ford 4.0L DOHC Turbo Barra motor in Australian Delivered Ford Falcon and Territory.\u003c\/p\u003e","brand":"Turbosmart","offers":[{"title":"Default Title","offer_id":68436476559602,"sku":"TS-0622-1052","price":275.69,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0632\/3201\/6626\/files\/media_7d086b12-8472-4c73-87a5-6aad52741637.jpg?v=1793778556"},{"product_id":"nstparts-turbosmart-iwg75-wastegate-actuator-suit-ford-xr6-actuator-7psi","title":"Turbosmart IWG75 Wastegate Actuator Suit Ford XR6 Actuator 7psi","description":"\u003cp\u003eTurbosmart Upgraded Wastegate Actuators have been developed to provide maximum possible boost response for your factory frame turbocharger. The Turbosmart IWG75 Series of upgraded Actuators benefit from an increased Working Ratio over the factory equipment resulting in improved boost response, throughout the RPM range.\u003c\/p\u003e\n\u003cp\u003eThis Improved working ratio is achieved through an increase to the effective surface area of the diaphragm \u0026amp; revisions to the actual springs fitted resulting in greater leverage of the forces the actuator is working against (boost and backpressure) while still being super-responsive.Â\u003c\/p\u003e\n\u003cp\u003eUpgrading with the same base pressure as factory, you can expect a broader boost \u0026amp; torque curve through peak boost being achieved earlier in the RPM and being held longer, into higher RPM. These improvements can be amplified with higher base pressures, however tuning \u0026amp; recalibration is likely required.\u003c\/p\u003e\n\u003cp\u003eFeatures\u003c\/p\u003e\n\u003cp\u003eProprietary Silicon Nomex Diaphragm\u003c\/p\u003e\n\u003cp\u003eChoice of Springs from 3psi to 26psi (Optional)\u003c\/p\u003e\n\u003cp\u003eHigh Grade Billet Aluminum Construction\u003c\/p\u003e\n\u003cp\u003eStainless Steel Rods and Clevis\u003c\/p\u003e\n\u003cp\u003eTurbosmart Unique Locking Collar System\u003c\/p\u003e\n\u003cp\u003eNotes\u003c\/p\u003e\n\u003cp\u003eThe 5psi Version is a direct replacement for the factory item. All other versions will require tuning \/ calibration of your engines ECU.\u003c\/p\u003e\n\u003cp\u003eThis is a bolt on fitment for the GT3582R turbocharger as fitted to the Ford 4.0L DOHC Turbo Barra motor in Australian Delivered Ford Falcon and Territory.\u003c\/p\u003e","brand":"Turbosmart","offers":[{"title":"Default Title","offer_id":68436480655602,"sku":"TS-0622-1072","price":275.69,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0632\/3201\/6626\/files\/media_665ad255-962d-419c-aeb4-29d73f2712be.jpg?v=1793778557"},{"product_id":"nstparts-turbosmart-iwg75-wastegate-actuator-suit-garrett-gtx28r-sr20-7psi","title":"Turbosmart IWG75 Wastegate Actuator Suit Garrett GTX28R SR20 7psi","description":"\u003cp\u003eTurbosmart Upgraded Wastegate Actuators have been developed to provide maximum possible boost response for your factory frame turbocharger. The Turbosmart IWG75 Series of upgraded Actuators benefit from an increased Working Ratio over the factory equipment resulting in improved boost response, throughout the RPM range.\u003c\/p\u003e\n\u003cp\u003eThis Improved working ratio is achieved through an increase to the effective surface area of the diaphragm \u0026amp; revisions to the actual springs fitted resulting in greater leverage of the forces the actuator is working against (boost and backpressure) while still being super-responsive.Â\u003c\/p\u003e\n\u003cp\u003eUpgrading with the same base pressure as factory, you can expect a broader boost \u0026amp; torque curve through peak boost being achieved earlier in the RPM and being held longer, into higher RPM. These improvements can be amplified with higher base pressures, however tuning \u0026amp; recalibration is likely required.\u003c\/p\u003e\n\u003cp\u003eFeatures\u003c\/p\u003e\n\u003cp\u003eProprietary Silicon Nomex Diaphragm\u003c\/p\u003e\n\u003cp\u003eChoice of Springs from 3psi to 26psi (Optional)\u003c\/p\u003e\n\u003cp\u003eHigh Grade Billet Aluminum Construction\u003c\/p\u003e\n\u003cp\u003eStainless Steel Rods and Clevis\u003c\/p\u003e\n\u003cp\u003eTurbosmart Unique Locking Collar System\u003c\/p\u003e\n\u003cp\u003eThis is a bolt on fitment for the Garrett GTX28R as fitted to the Nissan SR20DET series of engines.\u003c\/p\u003e","brand":"Turbosmart","offers":[{"title":"Default Title","offer_id":68436481769714,"sku":"TS-0625-4072","price":319.8,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0632\/3201\/6626\/files\/media_b3ad6349-c67c-473b-a0cc-f32dc134991e.jpg?v=1793778558"},{"product_id":"nstparts-turbosmart-iwg75-wastegate-actuator-suit-mitsubishi-evo-10-18psi","title":"Turbosmart IWG75 Wastegate Actuator Suit Mitsubishi EVO 10 18psi","description":"\u003cp\u003eTurbosmart Upgraded Wastegate Actuators have been developed to provide maximum possible boost response for your factory frame turbocharger. The Turbosmart IWG75 Series of upgraded Actuators benefit from an increased Working Ratio over the factory equipment resulting in improved boost response, throughout the RPM range.\u003c\/p\u003e\n\u003cp\u003eThis Improved working ratio is achieved through an increase to the effective surface area of the diaphragm \u0026amp; revisions to the actual springs fitted resulting in greater leverage of the forces the actuator is working against (boost and backpressure) while still being super-responsive.Â\u003c\/p\u003e\n\u003cp\u003eUpgrading with the same base pressure as factory, you can expect a broader boost \u0026amp; torque curve through peak boost being achieved earlier in the RPM and being held longer, into higher RPM. These improvements can be amplified with higher base pressures, however tuning \u0026amp; recalibration is likely required.\u003c\/p\u003e\n\u003cp\u003eFeatures\u003c\/p\u003e\n\u003cp\u003eProprietary Silicon Nomex Diaphragm\u003c\/p\u003e\n\u003cp\u003eChoice of Springs from 3psi to 26psi (Optional)\u003c\/p\u003e\n\u003cp\u003eHigh Grade Billet Aluminum Construction\u003c\/p\u003e\n\u003cp\u003eStainless Steel Rods and Clevis\u003c\/p\u003e\n\u003cp\u003eTurbosmart Unique Locking Collar System\u003c\/p\u003e\n\u003cp\u003eNotes\u003c\/p\u003e\n\u003cp\u003e14 psi Version is a direct replacement for the factory item. All other versions will require tuning \/ calibration of your engines ECU.\u003c\/p\u003e\n\u003cp\u003eThis is a bolt on fitment for the TD05H turbocharger as fitted factory to the 4B11 Powered Mitsubishi Evolution 10.\u003c\/p\u003e","brand":"Turbosmart","offers":[{"title":"Default Title","offer_id":68436482359538,"sku":"TS-0601-3182","price":319.8,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0632\/3201\/6626\/files\/media_68f46d4c-d8b8-4846-8791-e85e2c2423b1.jpg?v=1793778559"},{"product_id":"nstparts-turbosmart-iwg75-wastegate-actuator-suit-mitsubishi-evo-10-22psi","title":"Turbosmart IWG75 Wastegate Actuator Suit Mitsubishi EVO 10 22psi","description":"\u003cp\u003eTurbosmart Upgraded Wastegate Actuators have been developed to provide maximum possible boost response for your factory frame turbocharger. The Turbosmart IWG75 Series of upgraded Actuators benefit from an increased Working Ratio over the factory equipment resulting in improved boost response, throughout the RPM range.\u003c\/p\u003e\n\u003cp\u003eThis Improved working ratio is achieved through an increase to the effective surface area of the diaphragm \u0026amp; revisions to the actual springs fitted resulting in greater leverage of the forces the actuator is working against (boost and backpressure) while still being super-responsive.Â\u003c\/p\u003e\n\u003cp\u003eUpgrading with the same base pressure as factory, you can expect a broader boost \u0026amp; torque curve through peak boost being achieved earlier in the RPM and being held longer, into higher RPM. These improvements can be amplified with higher base pressures, however tuning \u0026amp; recalibration is likely required.\u003c\/p\u003e\n\u003cp\u003eFeatures\u003c\/p\u003e\n\u003cp\u003eProprietary Silicon Nomex Diaphragm\u003c\/p\u003e\n\u003cp\u003eChoice of Springs from 3psi to 26psi (Optional)\u003c\/p\u003e\n\u003cp\u003eHigh Grade Billet Aluminum Construction\u003c\/p\u003e\n\u003cp\u003eStainless Steel Rods and Clevis\u003c\/p\u003e\n\u003cp\u003eTurbosmart Unique Locking Collar System\u003c\/p\u003e\n\u003cp\u003eNotes\u003c\/p\u003e\n\u003cp\u003e14 psi Version is a direct replacement for the factory item. All other versions will require tuning \/ calibration of your engines ECU.\u003c\/p\u003e\n\u003cp\u003eThis is a bolt on fitment for the TD05H turbocharger as fitted factory to the 4B11 Powered Mitsubishi Evolution 10.\u003c\/p\u003e","brand":"Turbosmart","offers":[{"title":"Default Title","offer_id":68436491927794,"sku":"TS-0601-3222","price":319.8,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0632\/3201\/6626\/files\/media_1fb53bcd-1f9f-477a-b381-6f0a2e990ed2.jpg?v=1793778560"},{"product_id":"nstparts-turbosmart-iwg75-wastegate-actuator-suit-mitsubishi-evo-4-8-10psi","title":"Turbosmart IWG75 Wastegate Actuator Suit Mitsubishi EVO 4-8 10psi","description":"\u003cp\u003eTurbosmart Upgraded Wastegate Actuators have been developed to provide maximum possible boost response for your factory frame turbocharger. The Turbosmart IWG75 Series of upgraded Actuators benefit from an increased Working Ratio over the factory equipment resulting in improved boost response, throughout the RPM range.\u003c\/p\u003e\n\u003cp\u003eThis Improved working ratio is achieved through an increase to the effective surface area of the diaphragm \u0026amp; revisions to the actual springs fitted resulting in greater leverage of the forces the actuator is working against (boost and backpressure) while still being super-responsive.\u003c\/p\u003e\n\u003cp\u003eUpgrading with the same base pressure as factory, you can expect a broader boost \u0026amp; torque curve through peak boost being achieved earlier in the RPM and being held longer, into higher RPM. These improvements can be amplified with higher base pressures, however tuning \u0026amp; recalibration is likely required.\u003c\/p\u003e\n\u003cp\u003eFeatures\u003c\/p\u003e\n\u003cp\u003eProprietary Silicon Nomex Diaphragm\u003c\/p\u003e\n\u003cp\u003eChoice of Springs from 3psi to 26psi (Optional)\u003c\/p\u003e\n\u003cp\u003eHigh Grade Billet Aluminum Construction\u003c\/p\u003e\n\u003cp\u003eStainless Steel Rods and Clevis\u003c\/p\u003e\n\u003cp\u003eTurbosmart Unique Locking Collar System\u003c\/p\u003e\n\u003cp\u003eNotes\u003c\/p\u003e\n\u003cp\u003e14 psi Version is a direct replacement for the factory item. All other versions will require tuning \/ calibration of your engines ECU.\u003c\/p\u003e\n\u003cp\u003eThis is a bolt on fitment for the TD05H turbocharger as fitted factory to the 46G3 Powered Mitsubishi Evolution 4-8.\u003c\/p\u003e","brand":"Turbosmart","offers":[{"title":"Default Title","offer_id":68436493107442,"sku":"TS-0601-1102","price":319.8,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0632\/3201\/6626\/files\/media_94dd5acd-f5bd-4808-a6e1-b12c00f0dc7a.jpg?v=1793778561"},{"product_id":"nstparts-turbosmart-iwg75-wastegate-actuator-suit-mitsubishi-evo-4-8-14psi","title":"Turbosmart IWG75 Wastegate Actuator Suit Mitsubishi EVO 4-8 14psi","description":"\u003cp\u003eTurbosmart Upgraded Wastegate Actuators have been developed to provide maximum possible boost response for your factory frame turbocharger. The Turbosmart IWG75 Series of upgraded Actuators benefit from an increased Working Ratio over the factory equipment resulting in improved boost response, throughout the RPM range.\u003c\/p\u003e\n\u003cp\u003eThis Improved working ratio is achieved through an increase to the effective surface area of the diaphragm \u0026amp; revisions to the actual springs fitted resulting in greater leverage of the forces the actuator is working against (boost and backpressure) while still being super-responsive.\u003c\/p\u003e\n\u003cp\u003eUpgrading with the same base pressure as factory, you can expect a broader boost \u0026amp; torque curve through peak boost being achieved earlier in the RPM and being held longer, into higher RPM. These improvements can be amplified with higher base pressures, however tuning \u0026amp; recalibration is likely required.\u003c\/p\u003e\n\u003cp\u003eFeatures\u003c\/p\u003e\n\u003cp\u003eProprietary Silicon Nomex Diaphragm\u003c\/p\u003e\n\u003cp\u003eChoice of Springs from 3psi to 26psi (Optional)\u003c\/p\u003e\n\u003cp\u003eHigh Grade Billet Aluminum Construction\u003c\/p\u003e\n\u003cp\u003eStainless Steel Rods and Clevis\u003c\/p\u003e\n\u003cp\u003eTurbosmart Unique Locking Collar System\u003c\/p\u003e\n\u003cp\u003eNotes\u003c\/p\u003e\n\u003cp\u003e14 psi Version is a direct replacement for the factory item. All other versions will require tuning \/ calibration of your engines ECU.\u003c\/p\u003e\n\u003cp\u003eThis is a bolt on fitment for the TD05H turbocharger as fitted factory to the 46G3 Powered Mitsubishi Evolution 4-8.\u003c\/p\u003e","brand":"Turbosmart","offers":[{"title":"Default Title","offer_id":68436498415858,"sku":"TS-0601-1142","price":319.8,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0632\/3201\/6626\/files\/media_24881de1-20bf-4e73-bb6c-1bfe236f080a.jpg?v=1793778562"},{"product_id":"nstparts-turbosmart-iwg75-wastegate-actuator-suit-mitsubishi-evo-4-8-18psi","title":"Turbosmart IWG75 Wastegate Actuator Suit Mitsubishi EVO 4-8 18psi","description":"\u003cp\u003eTurbosmart Upgraded Wastegate Actuators have been developed to provide maximum possible boost response for your factory frame turbocharger. The Turbosmart IWG75 Series of upgraded Actuators benefit from an increased Working Ratio over the factory equipment resulting in improved boost response, throughout the RPM range.\u003c\/p\u003e\n\u003cp\u003eThis Improved working ratio is achieved through an increase to the effective surface area of the diaphragm \u0026amp; revisions to the actual springs fitted resulting in greater leverage of the forces the actuator is working against (boost and backpressure) while still being super-responsive.\u003c\/p\u003e\n\u003cp\u003eUpgrading with the same base pressure as factory, you can expect a broader boost \u0026amp; torque curve through peak boost being achieved earlier in the RPM and being held longer, into higher RPM. These improvements can be amplified with higher base pressures, however tuning \u0026amp; recalibration is likely required.\u003c\/p\u003e\n\u003cp\u003eFeatures\u003c\/p\u003e\n\u003cp\u003eProprietary Silicon Nomex Diaphragm\u003c\/p\u003e\n\u003cp\u003eChoice of Springs from 3psi to 26psi (Optional)\u003c\/p\u003e\n\u003cp\u003eHigh Grade Billet Aluminum Construction\u003c\/p\u003e\n\u003cp\u003eStainless Steel Rods and Clevis\u003c\/p\u003e\n\u003cp\u003eTurbosmart Unique Locking Collar System\u003c\/p\u003e\n\u003cp\u003eNotes\u003c\/p\u003e\n\u003cp\u003e14 psi Version is a direct replacement for the factory item. All other versions will require tuning \/ calibration of your engines ECU.\u003c\/p\u003e\n\u003cp\u003eThis is a bolt on fitment for the TD05H turbocharger as fitted factory to the 46G3 Powered Mitsubishi Evolution 4-8.\u003c\/p\u003e","brand":"Turbosmart","offers":[{"title":"Default Title","offer_id":68436499169522,"sku":"TS-0601-1182","price":319.8,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0632\/3201\/6626\/files\/media_63686d06-b8ef-4f32-a395-c5c54cbb45ff.jpg?v=1793778563"},{"product_id":"nstparts-turbosmart-iwg75-wastegate-actuator-suit-mitsubishi-evo-9-14psi","title":"Turbosmart IWG75 Wastegate Actuator Suit Mitsubishi EVO 9 14psi","description":"\u003cp\u003eTurbosmart Upgraded Wastegate Actuators have been developed to provide maximum possible boost response for your factory frame turbocharger. The Turbosmart IWG75 Series of upgraded Actuators benefit from an increased Working Ratio over the factory equipment resulting in improved boost response, throughout the RPM range.\u003c\/p\u003e\n\u003cp\u003eThis Improved working ratio is achieved through an increase to the effective surface area of the diaphragm \u0026amp; revisions to the actual springs fitted resulting in greater leverage of the forces the actuator is working against (boost and backpressure) while still being super-responsive.Â\u003c\/p\u003e\n\u003cp\u003eUpgrading with the same base pressure as factory, you can expect a broader boost \u0026amp; torque curve through peak boost being achieved earlier in the RPM and being held longer, into higher RPM. These improvements can be amplified with higher base pressures, however tuning \u0026amp; recalibration is likely required.\u003c\/p\u003e\n\u003cp\u003eFeatures\u003c\/p\u003e\n\u003cp\u003eProprietary Silicon Nomex Diaphragm\u003c\/p\u003e\n\u003cp\u003eChoice of Springs from 3psi to 26psi (Optional)\u003c\/p\u003e\n\u003cp\u003eHigh Grade Billet Aluminum Construction\u003c\/p\u003e\n\u003cp\u003eStainless Steel Rods and Clevis\u003c\/p\u003e\n\u003cp\u003eTurbosmart Unique Locking Collar System\u003c\/p\u003e\n\u003cp\u003eNotes\u003c\/p\u003e\n\u003cp\u003e14 psi Version is a direct replacement for the factory item. All other versions will require tuning \/ calibration of your engines ECU.\u003c\/p\u003e\n\u003cp\u003eThis is a bolt on fitment for the TD05H turbocharger as fitted factory to the 46G3 Powered Mitsubishi Evolution 9.\u003c\/p\u003e","brand":"Turbosmart","offers":[{"title":"Default Title","offer_id":68436508508402,"sku":"TS-0601-2142","price":319.8,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0632\/3201\/6626\/files\/media_2ba78516-376f-4884-ba71-89c162a404a1.jpg?v=1793778565"},{"product_id":"nstparts-turbosmart-iwg75-wastegate-actuator-suit-mitsubishi-evo-9-18psi","title":"Turbosmart IWG75 Wastegate Actuator Suit Mitsubishi EVO 9 18psi","description":"\u003cp\u003eTurbosmart Upgraded Wastegate Actuators have been developed to provide maximum possible boost response for your factory frame turbocharger. The Turbosmart IWG75 Series of upgraded Actuators benefit from an increased Working Ratio over the factory equipment resulting in improved boost response, throughout the RPM range.\u003c\/p\u003e\n\u003cp\u003eThis Improved working ratio is achieved through an increase to the effective surface area of the diaphragm \u0026amp; revisions to the actual springs fitted resulting in greater leverage of the forces the actuator is working against (boost and backpressure) while still being super-responsive.Â\u003c\/p\u003e\n\u003cp\u003eUpgrading with the same base pressure as factory, you can expect a broader boost \u0026amp; torque curve through peak boost being achieved earlier in the RPM and being held longer, into higher RPM. These improvements can be amplified with higher base pressures, however tuning \u0026amp; recalibration is likely required.\u003c\/p\u003e\n\u003cp\u003eFeatures\u003c\/p\u003e\n\u003cp\u003eProprietary Silicon Nomex Diaphragm\u003c\/p\u003e\n\u003cp\u003eChoice of Springs from 3psi to 26psi (Optional)\u003c\/p\u003e\n\u003cp\u003eHigh Grade Billet Aluminum Construction\u003c\/p\u003e\n\u003cp\u003eStainless Steel Rods and Clevis\u003c\/p\u003e\n\u003cp\u003eTurbosmart Unique Locking Collar System\u003c\/p\u003e\n\u003cp\u003eNotes\u003c\/p\u003e\n\u003cp\u003e14 psi Version is a direct replacement for the factory item. All other versions will require tuning \/ calibration of your engines ECU.\u003c\/p\u003e\n\u003cp\u003eThis is a bolt on fitment for the TD05H turbocharger as fitted factory to the 46G3 Powered Mitsubishi Evolution 9.\u003c\/p\u003e","brand":"Turbosmart","offers":[{"title":"Default Title","offer_id":68436509360370,"sku":"TS-0601-2182","price":319.8,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0632\/3201\/6626\/files\/media_e703ff48-d6d7-4c91-ba0f-050da2878fbb.jpg?v=1793778566"},{"product_id":"nstparts-turbosmart-iwg75-wastegate-actuator-suit-mitsubishi-evo-9-26psi","title":"Turbosmart IWG75 Wastegate Actuator Suit Mitsubishi EVO 9 26psi","description":"\u003cp\u003eTurbosmart Upgraded Wastegate Actuators have been developed to provide maximum possible boost response for your factory frame turbocharger. The Turbosmart IWG75 Series of upgraded Actuators benefit from an increased Working Ratio over the factory equipment resulting in improved boost response, throughout the RPM range.\u003c\/p\u003e\n\u003cp\u003eThis Improved working ratio is achieved through an increase to the effective surface area of the diaphragm \u0026amp; revisions to the actual springs fitted resulting in greater leverage of the forces the actuator is working against (boost and backpressure) while still being super-responsive.Â\u003c\/p\u003e\n\u003cp\u003eUpgrading with the same base pressure as factory, you can expect a broader boost \u0026amp; torque curve through peak boost being achieved earlier in the RPM and being held longer, into higher RPM. These improvements can be amplified with higher base pressures, however tuning \u0026amp; recalibration is likely required.\u003c\/p\u003e\n\u003cp\u003eFeatures\u003c\/p\u003e\n\u003cp\u003eProprietary Silicon Nomex Diaphragm\u003c\/p\u003e\n\u003cp\u003eChoice of Springs from 3psi to 26psi (Optional)\u003c\/p\u003e\n\u003cp\u003eHigh Grade Billet Aluminum Construction\u003c\/p\u003e\n\u003cp\u003eStainless Steel Rods and Clevis\u003c\/p\u003e\n\u003cp\u003eTurbosmart Unique Locking Collar System\u003c\/p\u003e\n\u003cp\u003eNotes\u003c\/p\u003e\n\u003cp\u003e14 psi Version is a direct replacement for the factory item. All other versions will require tuning \/ calibration of your engines ECU.\u003c\/p\u003e\n\u003cp\u003eThis is a bolt on fitment for the TD05H turbocharger as fitted factory to the 46G3 Powered Mitsubishi Evolution 9.\u003c\/p\u003e","brand":"Turbosmart","offers":[{"title":"Default Title","offer_id":68436511097074,"sku":"TS-0601-2262","price":319.8,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0632\/3201\/6626\/files\/media_1b939547-2f8a-4b36-bfab-66665d747795.jpg?v=1793778567"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0632\/3201\/6626\/collections\/ts-tile-v2-turbosmart-internal-wastegates.png?v=1793778808","url":"https:\/\/www.rapidperformance.co.nz\/collections\/turbosmart-internal-wastegates.oembed","provider":"Rapid Performance","version":"1.0","type":"link"}