{"title":"Subaru","description":"","products":[{"product_id":"g5-ecu-plug-in-toyota-gt86-subaru-brz-rhd","title":"G5 ECU Plug-In - Toyota GT86\/Subaru BRZ - RHD","description":"\u003cp\u003eSKU 241-4000\u003cbr\u003eThe GT86 G5 Plug-in is a standalone plug and play replacement for the factory ECU and plugs straight into the original wiring loom, no adapter harness needed and comes with a sample map for a tuning head start. The GT86 G5 Plug-in processing unit runs the same powerful microcontroller and firmware as the G5 Voodoo Pro. \u003cbr\u003eDesigned for the 2.0 L 4U-GSE\/FA20 H4 Engine Right-Hand Drive cars. Support for both Manual and Automatic Transmissions. \u003cbr\u003eModels Supported by 241-4000 Automotive computer unit:\u003c\/p\u003e\n\u003cp\u003eToyota 86, ZN6, 2012 – 2021\u003cbr\u003eToyota GT86, ZN6, 2012-2021\u003cbr\u003eSubaru BRZ, ZC6, 2012-2020\u003c\/p\u003e\n\u003cp\u003eIn the box:\u003cbr\u003eG5-GT86 Plugin ECU\u003cbr\u003eUSB-C Connection Cable\u003cbr\u003eLocking USB-C extension cable for easy tuning access\u003cbr\u003e2 x M6 screws for ECU mounting in OEM bracket\u003cbr\u003eDTM4 CAN Connection Cable (Pre-Installed in Enclosure)\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eNotes:\u003cbr\u003eDue to the very tight nature of the factory ECU location, the LHD and RHD mounting methods differ. This is for right-hand drive RHD vehicles. \u003cbr\u003eA LHD Version is available under part number 241-4200\u003c\/p\u003e\n\u003cp\u003e2017+ Models have some differences to earlier cars and will not run with the sample maps supplied in PCLink and the standard plug-in ecu hardware.\u003cbr\u003e2017+ Engines have a Hall Effect Crank Sensor instead of Reluctor and so require the Trigger 1 Type changed from 'Reluctor' to 'Optical\/Hall' and the Trigger 1 Pull-up set to ON.\u003cbr\u003e2017+ Engines have a different DI Fuel Pressure sensor than earlier models, this sensor has 4 pins instead of 3 and requires an 8.2kohm pullup resistor to be wired between C7 (An Volt 4) and 5v, the DI Fuel Pressure Source changed from An Volt 3 to An Volt 4 and the pressure calibration changed to 0kPa at 4.06V and 30000kPa at 0.46V.\u003c\/p\u003e\n\u003cp\u003eControl both Direct and Port Injection\u003cbr\u003eFull OEM CAN Bus integration\u003cbr\u003eControl both Manual and Automatic Transmissions\u003cbr\u003eBillet CNC Aluminium Enclosure\u003cbr\u003eMounts in OEM Location\u003cbr\u003eIncludes a locking USB-C extension cable for easy tuning access\u003cbr\u003eComes with a built-in powered DTM4 CAN cable\u003cbr\u003eFull factory E-throttle (DBW) control\u003cbr\u003eFull VVT-i control\u003cbr\u003e512MB of Onboard Data Logging in data storage unit, up to 250 channels and 100k samples per second\u003cbr\u003eRuns on Link’s renowned PC Link, giving you the confidence to get started right away\u003cbr\u003eBacked by Link’s Limited Lifetime Warranty\u003c\/p\u003e\n\u003cp\u003e*The GT86 plug-in does not support factory wide band sensors. \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eAll Link Plug-in ECUs come with the below features as standard:\u003c\/p\u003e\n\u003cp\u003ePlug and Play - A Direct Replacement for the Factory ECU, no adapter looms needed.\u003cbr\u003eAll motorsport features enabled – Anti-lag, Boost Control, Cruise Control, Gear Shift Control, Nitrous Control, Launch Control, Paddle Shift Control, Race Timer and Power Management, Rolling Anti-lag and Traction Control\u003cbr\u003eTwo CAN bus channels\u003cbr\u003eAdvanced Modelled Fuel equation with flex fuel capability, or a more basic “Traditional” equation is available\u003cbr\u003eExceptional adaptive knock control or traditional threshold-based knock control.\u003cbr\u003eOnboard 3 Axis Accelerometer\u003cbr\u003eOnboard Trigger Oscilloscope\u003cbr\u003eLive user configurable math channels running in ECU\u003cbr\u003eVery flexible user configurable CAN bus inputs and outputs. Most 3rd party CAN bus devices supported\u003cbr\u003eCAN Keypad control\u003cbr\u003eFlexible engine protection limiters\u003cbr\u003ePC Link software – Tuning, display and powerful log analysis all in one package.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Rapid Performance","offers":[{"title":"Default Title","offer_id":49303500357874,"sku":null,"price":3444.25,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0632\/3201\/6626\/files\/GT86PLUGIN.avif?v=1779921680"},{"product_id":"wrxlink-v11-wrx11x","title":"WRXLink V11 - WRX11X","description":"\u003cp\u003eSKU 238-4000\u003cbr\u003eEasy to install. Affordable. Reliable.\u003cbr\u003eG4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car.\u003c\/p\u003e\n\u003cp\u003eThis ECU fits inside the factory OEM enclosure. Installation of processing unit is a breeze, with no alteration of the factory wiring loom required for the models listed below. \u003c\/p\u003e\n\u003cp\u003eDue to the amount of variation on this vehicle, please ensure you read the Configuration - Memo Text in PCLink.\u003c\/p\u003e\n\u003cp\u003eThis product supports the following models:\u003cbr\u003e2007-2014 WRX and WRX STI with GR\/GV\/GH\/GE chassis codes, for JDM\/AUDM\/SADM\/EURO markets, with turbocharged EJ20 or EJ25 engines.\u003cbr\u003e2008-2010 USDM models which have the common international Denso ECU Pinout**\u003cbr\u003e2015-2021 WRX STI with VAB\/VAF chassis codes, for JDM\/AUDM\/SADM\/EURO markets, with turbocharged EJ20 or EJ25 engines\u003cbr\u003e**Note: Refer to the supported models document below for more detail. 2011 and later USDM models are supported by our WRX11 USDM ECU\u003c\/p\u003e\n\u003cp\u003eTake a look at our supported models list to find out which models are supported and which are not. Alternatively, contact your LinkECU Reseller or our 24\/6 Tech Support Team.\u003c\/p\u003e\n\u003cp\u003eImportant Notes\u003cbr\u003ePlease check your connector matches the header in the listed photo before purchasing. \u003cbr\u003eThis ECU works for manual transmissions only.  \u003cbr\u003eAir temp sensor highly recommended. \u003cbr\u003eMost factory features are supported including DCCD, hill start assist, SI drive, cruise control, cam control \u0026amp; ABS supported. \u003cbr\u003eCheck the features tab for I\/O input \u0026amp; output expansion options.\u003cbr\u003eThe security\/immobiliser lamp may remain illuminated in some models\u003cbr\u003eNote: This Plug-in features a new 4 pin powered CAN connector and cannot use the old CANPCB cable for CAN connection.  Use the CANJST4 (Link PN 101-0198) cable for connecting CAN devices.  This new 4 pin port and cable provide not only the CAN connection, but also a protected 12V power supply and ground for powering the CAN devices.  The power supply is protected by a self-resetting fuse rated at 3A continuous.\u003c\/p\u003e\n\u003cp\u003eG4X PlugIn Key Features (where applicable):\u003c\/p\u003e\n\u003cp\u003eUp to 6D fuel and ignition mapping \u003cbr\u003ePrecision closed loop cam control (four cam, independent control) \u003cbr\u003eSequential fuel delivery \u003cbr\u003eDigital triggering, all OEM patterns \u003cbr\u003eOEM idle hardware supported \u003cbr\u003e5D boost control with three switchable tables \u003cbr\u003eMotorsport features - antilag, launch, flat shift \u003cbr\u003eContinuous barometric correction (on board) \u003cbr\u003eCAN port \u003cbr\u003eQuickTune - automated fuel tuning \u003cbr\u003eIndividual cylinder correction \u003cbr\u003eUSB tuning cable included \u003cbr\u003eStats recording into on-board memory \u003cbr\u003eGear compensations for spark, boost and fuel \u003cbr\u003eReal time selectable dual fuel, ignition and boost maps \u003cbr\u003eSync and crank sensors can be a combination of Hall effect, variable reluctance or optical \u003cbr\u003eBoost control referenced to gear, speed or throttle position \u003cbr\u003e512 mega bytes data logging memory within storage unit \u003cbr\u003eStaged injection \u003cbr\u003eKnock with \"windowing\" \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eI\/O Options:\u003c\/p\u003e\n\u003cp\u003eThe following expansion connector inputs\/outputs are provided:  \u003cbr\u003eExpansion connector 1   \u003cbr\u003ePin 1                Aux 16 \u003cbr\u003ePin 2                DI 11 \u003cbr\u003ePin 3                An Temp 4 \u003cbr\u003ePin 4                Knock 2 \u003cbr\u003ePin 5                Injector 6 \u003c\/p\u003e","brand":"Rapid Performance","offers":[{"title":"Default Title","offer_id":49303776887026,"sku":null,"price":2984.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0632\/3201\/6626\/files\/WRXLINK-V11.avif?v=1779921863"},{"product_id":"wrxlink-7-9-wrx9x","title":"WRXLink (7-9) - WRX9X","description":"\u003cp\u003eSKU 229-4000\u003cbr\u003eEasy to install. Affordable. Reliable.  \u003cbr\u003eG4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car.  \u003cbr\u003eThis ECU fits inside the factory OEM enclosure. Installation of the processing unit is a breeze, with no alteration of the factory wiring loom required for the models listed below. \u003c\/p\u003e\n\u003cp\u003eDesigned for the WRX V7-9 EJ20 (GD\/GG chassis, MY2000-2007 with cam control, 2.0L models only).\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003ePlease check your connector matches the header in the listed photo before purchasing. This ECU fits 5 Plug ECUs. \u003cbr\u003eThis ECU works for manual transmissions only.  \u003cbr\u003eAir temp sensor highly recommended. \u003cbr\u003eMost factory features are supported. \u003cbr\u003eCheck the features tab for I\/O input \u0026amp; output expansion options.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eG4X PlugIn Key Features (where applicable):\u003cbr\u003eUp to 6D fuel and ignition mapping\u003cbr\u003ePrecision closed loop cam control (four cam, independent control)\u003cbr\u003eSequential fuel delivery\u003cbr\u003eDigital triggering, all OEM patterns\u003cbr\u003eOEM idle hardware supported\u003cbr\u003e5D boost control with three switchable tables\u003cbr\u003eMotorsport features - antilag, launch, flat shift\u003cbr\u003eContinuous barometric correction (on board)\u003cbr\u003eCAN port\u003cbr\u003eQuickTune - automated fuel tuning\u003cbr\u003eIndividual cylinder correction\u003cbr\u003eUSB tuning cable included\u003cbr\u003eStats recording into on-board memory\u003cbr\u003eGear compensations for spark, boost and fuel\u003cbr\u003eReal time selectable dual fuel, ignition and boost maps\u003cbr\u003eSync and crank sensors can be a combination of Hall effect, variable reluctance or optical\u003cbr\u003eBoost control referenced to gear, speed or throttle position\u003cbr\u003e512 mega bytes data logging memory within storage unit\u003cbr\u003eStaged injection\u003cbr\u003eKnock with \"windowing\"\u003c\/p\u003e\n\u003cp\u003eI\/O Options:\u003cbr\u003eThe following expansion connector inputs\/outputs are provided: \u003cbr\u003eExpansion connector 1  \u003cbr\u003eIgn 6                Ignition 6 Auxiliary Output \u003cbr\u003eIgn 7                Ignition 7 Auxiliary Output \u003cbr\u003eIgn 8                Ignition 8 Auxiliary Output \u003cbr\u003eDI 7                Digital Input \u003cbr\u003eDI 8                Digital Input \u003cbr\u003eDI 9                Digital Input\u003cbr\u003eAn Temp 4        Temperature sensor input \u003cbr\u003eAn Volt 11        Analog 0-5V input \u003c\/p\u003e\n\u003cp\u003eExpansion connector 2  \u003cbr\u003eGnd                Sensor Ground Only  \u003cbr\u003e+5V Out        Low Current +5V Supply \u003cbr\u003eAux 9                EThrottle - can't be used as an Aux out \u003cbr\u003eAux 10                Auxiliary Output \u003cbr\u003eVolt 6                Analog 0-5V input \u003cbr\u003eVolt 7                Analog 0-5V input \u003cbr\u003eVolt 9                Analog 0-5V input \u003cbr\u003eVolt 10                Analog 0-5V input \u003c\/p\u003e","brand":"Rapid Performance","offers":[{"title":"Default Title","offer_id":49303925358834,"sku":null,"price":2984.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0632\/3201\/6626\/files\/WRX7-9WRX9.0.avif?v=1779922006"},{"product_id":"wrxlink-wrx6x","title":"WRXLink - WRX6X","description":"\u003cp\u003eSKU 228-4000\u003cbr\u003eEasy to install. Affordable. Reliable.  \u003cbr\u003eG4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car.  \u003cbr\u003eThis ECU fits inside the factory OEM enclosure. Installation of the processing unit is a breeze, with no alteration of the factory wiring loom required for the models listed below. \u003c\/p\u003e\n\u003cp\u003eDesigned for the WRX V5-6 EJ20. \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003ePlease check your pinout matches the header in the listed photo before purchasing.  \u003cbr\u003eThis ECU works for manual transmissions only.  \u003cbr\u003eAir temp sensor highly recommended. \u003cbr\u003eMost factory features are supported. \u003cbr\u003eCheck the features tab for I\/O input \u0026amp; output expansion options  \u003cbr\u003eNote: V1.4 onwards of this Plug-in features a new 4 pin powered CAN connector and cannot use the old CANPCB cable for CAN connection.  Use the CANJST4 (Code 101-0198) cable for connecting CAN devices.  This new 4 pin port and cable provides not only the CAN connection, but also a protected 12V power supply and ground for powering the CAN devices.  The power supply is protected by a self-resetting fuse rated at 3A continuous. \u003c\/p\u003e\n\u003cp\u003eSuitable Applications for 228-4000 automotive computer unit:\u003cbr\u003eGC8F \u003cbr\u003eGC8G \u003cbr\u003eWRX and STI from 09\/1998 to 08\/00 \u003cbr\u003eMY99 \u0026amp; MY00 \u003c\/p\u003e\n\u003cp\u003eG4X PlugIn Key Features (where applicable):\u003cbr\u003eUp to 6D fuel and ignition mapping\u003cbr\u003ePrecision closed loop cam control (four cam, independent control)\u003cbr\u003eSequential fuel delivery\u003cbr\u003eDigital triggering, all OEM patterns\u003cbr\u003eOEM idle hardware supported\u003cbr\u003e5D boost control with three switchable tables\u003cbr\u003eMotorsport features - antilag, launch, flat shift\u003cbr\u003eContinuous barometric correction (on board)\u003cbr\u003eCAN port\u003cbr\u003eQuickTune - automated fuel tuning\u003cbr\u003eIndividual cylinder correction\u003cbr\u003eUSB tuning cable included\u003cbr\u003eStats recording into on-board memory\u003cbr\u003eGear compensations for spark, boost and fuel\u003cbr\u003eReal time selectable dual fuel, ignition and boost maps\u003cbr\u003eSync and crank sensors can be a combination of Hall effect, variable reluctance or optical\u003cbr\u003eBoost control referenced to gear, speed or throttle position\u003cbr\u003e512 mega bytes data logging memory data storage unit \u003cbr\u003eStaged injection\u003cbr\u003eKnock with \"windowing\"\u003c\/p\u003e\n\u003cp\u003eThe following expansion connector inputs\/outputs are provided: \u003cbr\u003eXS connector 1 \u003cbr\u003eGnd                Sensor Ground Only  \u003cbr\u003e+5V Out          Low Current +5V Supply \u003cbr\u003eDI 8               Digital Input \u003cbr\u003eDI 9               Digital Input \u003cbr\u003eAn Volt 8        Analog 0-5V input \u003cbr\u003eAn Volt 9        Analog 0-5V input \u003cbr\u003eIgn 7                Ignition 7 Auxiliary Output \u003cbr\u003eIgn 8                Ignition 8 Auxiliary Output \u003c\/p\u003e\n\u003cp\u003eExpansion connector 2  \u003cbr\u003eGnd                Sensor Ground Only  \u003cbr\u003e+5V Out        Low Current +5V Supply \u003cbr\u003eDI 5                Digital Input \u003cbr\u003eDI 7                Digital Input \u003cbr\u003eAn Volt 5        Analog 0-5V input \u003cbr\u003eAn Volt 6        Analog 0-5V input \u003cbr\u003eAn Temp 2        Temperature sensor input \u003cbr\u003eAn Temp 3        Temperature sensor input \u003c\/p\u003e","brand":"Rapid Performance","offers":[{"title":"Default Title","offer_id":49304091197682,"sku":null,"price":2409.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0632\/3201\/6626\/files\/WRXLINKV5-6WRX6.0.avif?v=1779922128"},{"product_id":"wrxlink-3-4-wrx4x","title":"WRXLink (3-4) - WRX4X","description":"\u003cp\u003eSKU 227-4000\u003cbr\u003eEasy to install. Affordable. Reliable.  \u003cbr\u003eG4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car.  \u003cbr\u003eThis ECU fits inside the factory OEM enclosure. Installation of the processing unit is a breeze, with no alteration of the factory wiring loom required for the models listed below. \u003c\/p\u003e\n\u003cp\u003eDesigned for the WRX V3-4 EJ20 \u003c\/p\u003e\n\u003cp\u003ePlease check your connector matches the header in the listed photo before purchasing.  \u003cbr\u003eThis ECU works for manual transmissions only.  \u003cbr\u003eAir temp sensor highly recommended. \u003cbr\u003eMost factory features are supported. \u003cbr\u003eCheck the features tab for I\/O input \u0026amp; output expansion options.\u003cbr\u003eThis ECU will need a modification before E-Throttle is usable.\u003c\/p\u003e\n\u003cp\u003eSuitable Applications for 227-4000 automotive computer unit: \u003c\/p\u003e\n\u003cp\u003eGC8D \u003cbr\u003eGC8E \u003cbr\u003eWRX and STI from 09\/1996 to 08\/1998\u003c\/p\u003e\n\u003cp\u003eG4X PlugIn Key Features (where applicable):\u003cbr\u003eUp to 6D fuel and ignition mapping\u003cbr\u003ePrecision closed loop cam control (four cam, independent control)\u003cbr\u003eSequential fuel delivery\u003cbr\u003eDigital triggering, all OEM patterns\u003cbr\u003eOEM idle hardware supported\u003cbr\u003e5D boost control with three switchable tables\u003cbr\u003eMotorsport features - antilag, launch, flat shift\u003cbr\u003eContinuous barometric correction (on board)\u003cbr\u003eCAN port\u003cbr\u003eQuickTune - automated fuel tuning\u003cbr\u003eIndividual cylinder correction\u003cbr\u003eUSB tuning cable included\u003cbr\u003eStats recording into on-board memory\u003cbr\u003eGear compensations for spark, boost and fuel\u003cbr\u003eReal time selectable dual fuel, ignition and boost maps\u003cbr\u003eSync and crank sensors can be a combination of Hall effect, variable reluctance or optical\u003cbr\u003eBoost control referenced to gear, speed or throttle position\u003cbr\u003e512 mega bytes data logging memory data storage unit\u003cbr\u003eStaged injection\u003cbr\u003eKnock with \"windowing\"\u003c\/p\u003e\n\u003cp\u003eThe following expansion connector inputs\/outputs are provided: \u003cbr\u003eXS connector 1  \u003cbr\u003eGnd                Sensor Ground Only  \u003cbr\u003e+5V                Low Current +5V Supply \u003cbr\u003eDI 5                Digital Input \u003cbr\u003eDI 6                Digital Input \u003cbr\u003eVolt 5                Analog 0-5V input \u003cbr\u003eVolt 6                Analog 0-5V input \u003cbr\u003eTemp 4                Temperature sensor input \u003cbr\u003eTemp 3                Temperature sensor input \u003c\/p\u003e\n\u003cp\u003eExpansion connector 2  \u003cbr\u003eGnd                Sensor Ground Only  \u003cbr\u003e+5V                Low Current +5V Supply \u003cbr\u003eDI 9                Digital Input \u003cbr\u003eDI 10                Digital Input \u003cbr\u003eVolt 8                Analog 0-5V input \u003cbr\u003eVolt 9                Analog 0-5V input \u003cbr\u003eIgn 7                Ignition 7 Auxiliary Output \u003cbr\u003eIgn 8                Ignition 8 Auxiliary Output \u003c\/p\u003e","brand":"Rapid Performance","offers":[{"title":"Default Title","offer_id":49304269062386,"sku":null,"price":2064.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0632\/3201\/6626\/files\/WRXLINKV3-4WRX4.0.avif?v=1779922236"},{"product_id":"wrxlink-wrx2x","title":"WRXLink - WRX2X","description":"\u003cp\u003eSKU 226-4000\u003cbr\u003eEasy to install. Affordable. Reliable.  \u003cbr\u003eG4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car.  \u003cbr\u003eThis ECU fits inside the factory OEM enclosure. Installation of the processing unit is a breeze, with no alteration of the factory wiring loom required for the models listed below. \u003c\/p\u003e\n\u003cp\u003eDesigned for the WRX V1-2 EJ20. \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003ePlease check your pinoutconnector matches the header in the listed photo before purchasing.  \u003cbr\u003eThis ECU works for manual transmissions only.  \u003cbr\u003eAir temp sensor highly recommended. \u003cbr\u003eMost factory features are supported. \u003cbr\u003eCheck the features tab for I\/O input \u0026amp; output expansion options.\u003cbr\u003eThis ECU will need a modification before E-Throttle is usable.\u003c\/p\u003e\n\u003cp\u003eSuitable Applications for 226-4000 Automotive Computer Unit:\u003c\/p\u003e\n\u003cp\u003eGC8A \u003cbr\u003eGC8B \u003cbr\u003eGC8C \u003cbr\u003eWRX and STI from 10\/1992 to 8\/1996 \u003c\/p\u003e\n\u003cp\u003eG4X PlugIn Key Features (where applicable):\u003cbr\u003eUp to 6D fuel and ignition mapping\u003cbr\u003ePrecision closed loop cam control (four cam, independent control)\u003cbr\u003eSequential fuel delivery\u003cbr\u003eDigital triggering, all OEM patterns\u003cbr\u003eOEM idle hardware supported\u003cbr\u003e5D boost control with three switchable tables\u003cbr\u003eMotorsport features - antilag, launch, flat shift\u003cbr\u003eContinuous barometric correction (on board)\u003cbr\u003eCAN port\u003cbr\u003eQuickTune - automated fuel tuning\u003cbr\u003eIndividual cylinder correction\u003cbr\u003eUSB tuning cable included\u003cbr\u003eStats recording into on-board memory\u003cbr\u003eGear compensations for spark, boost and fuel\u003cbr\u003eReal time selectable dual fuel, ignition and boost maps\u003cbr\u003eSync and crank sensors can be a combination of Hall effect, variable reluctance or optical\u003cbr\u003eBoost control referenced to gear, speed or throttle position\u003cbr\u003e512 mega bytes data logging memory within data storage unit\u003cbr\u003eStaged injection\u003cbr\u003eKnock with \"windowing\"\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eThe following expansion connector inputs\/outputs are provided: \u003cbr\u003eExpansion connector 1  \u003cbr\u003eGnd                Sensor Ground Only  \u003cbr\u003e+5V                Low Current +5V Supply \u003cbr\u003eDI 5                Digital Input \u003cbr\u003eDI 6                Digital Input \u003cbr\u003eVolt 5                Analog 0-5V input \u003cbr\u003eVolt 6                Analog 0-5V input \u003cbr\u003eAn Temp 2        Temperature sensor input \u003cbr\u003eAn Temp 3        Temperature sensor input \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eExpansion connector 2  \u003cbr\u003eGnd                Sensor Ground Only  \u003cbr\u003e+5V                Low Current +5V Supply \u003cbr\u003eDI 9                Digital Input \u003cbr\u003eDI 10                Digital Input \u003cbr\u003eVolt 8                Analog 0-5V input \u003cbr\u003eVolt 9                Analog 0-5V input \u003cbr\u003eIgn 7                Ignition 7 Auxiliary Output \u003cbr\u003eIgn 8                Ignition 8 Auxiliary Output \u003c\/p\u003e","brand":"Rapid Performance","offers":[{"title":"Default Title","offer_id":49304432836850,"sku":null,"price":2064.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0632\/3201\/6626\/files\/WRXLINKV1-2.avif?v=1779922344"},{"product_id":"wrxlink-v10-wrx107x","title":"WRXLink (V10) - WRX107X","description":"\u003cp\u003eSKU 225-4000\u003cbr\u003eEasy to install. Affordable. Reliable.\u003cbr\u003eThe Link G4X PlugIn ECU transforms your WRX into a precision-tuned performance machine. Enjoy the latest in engine management technology, fitted directly into your OEM enclosure with no loom modifications required.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eChoose the Right Model – Pin Check Required!\u003cbr\u003eThe fastest and most reliable way to determine which ECU you need is to check pins A1–A3 on the OEM connector:\u003c\/p\u003e\n\u003cp\u003eIf pins A1–A3 have wires → You need the WRX104X.\u003cbr\u003eIf pins A1–A3 are empty → You need the WRX107X (this listing, 225-4000)\u003cbr\u003eSome late 2006 cars require the WRX107X, so this check is essential.\u003c\/p\u003e\n\u003cp\u003eVehicle Compatibility:\u003cbr\u003eDesigned for WRX V10 EJ25 (2.5L) 2004–2007\u003cbr\u003eManual transmission only\u003cbr\u003eSuits GD\/GG chassis with electronic throttle\u003cbr\u003eNot suitable for GR\/GH\/GE\/GV hatchback or 3rd generation WRX\u003cbr\u003eModel breakdown:\u003cbr\u003eWRX104X → Mostly covers 2004–2006 \u003cbr\u003eWRX107X → Covers 2007 and some late 2006\u003c\/p\u003e\n\u003cp\u003eWhy Choose Link G4X?\u003cbr\u003eFactory fit, motorsport power – fits inside the OEM case, yet offers world-class tuning flexibility.\u003cbr\u003ePlug \u0026amp; play install – no wiring loom alterations for supported models.\u003cbr\u003eConfidence \u0026amp; reliability – trusted by tuners worldwide.\u003cbr\u003eFull feature set – advanced boost control, antilag, launch, knock protection \u0026amp; more.\u003c\/p\u003e\n\u003cp\u003eG4X PlugIn Key Features (where applicable):\u003cbr\u003eUp to 6D fuel and ignition mapping\u003cbr\u003ePrecision closed loop cam control (four cam, independent control)\u003cbr\u003eSequential fuel delivery\u003cbr\u003eDigital triggering, all OEM patterns\u003cbr\u003eOEM idle hardware supported\u003cbr\u003e5D boost control with three switchable tables\u003cbr\u003eMotorsport features - antilag, launch, flat shift\u003cbr\u003eContinuous barometric correction (on board)\u003cbr\u003eCAN port\u003cbr\u003eQuickTune - automated fuel tuning\u003cbr\u003eIndividual cylinder correction\u003cbr\u003eUSB tuning cable included\u003cbr\u003eStats recording into on-board memory\u003cbr\u003eGear compensations for spark, boost and fuel\u003cbr\u003eReal time selectable dual fuel, ignition and boost maps\u003cbr\u003eSync and crank sensors can be a combination of Hall effect, variable reluctance or optical\u003cbr\u003eBoost control referenced to gear, speed or throttle position\u003cbr\u003e512 mega bytes data logging memory within data storage unit\u003cbr\u003eStaged injection\u003cbr\u003eKnock with \"windowing\"\u003c\/p\u003e\n\u003cp\u003eThere are two different options for the expansion connectors, depending on whether your ECU is the 2004-2006 ECU or the 2006-2007 ECU. \u003c\/p\u003e\n\u003cp\u003e2004-2006 ECU \u003cbr\u003eThe following expansion connector inputs\/outputs are provided: \u003cbr\u003eBlank                AN Volt 11 \u003cbr\u003eAn Temp 4        Temperature sensor input \u003cbr\u003eBlank                No function \u003cbr\u003eBlank                AN Volt 12 \u003cbr\u003eBlank                No function \u003cbr\u003eBlank                No function \u003cbr\u003e+5V Out        Low Current +5V Supply \u003cbr\u003eGnd                Sensor Ground Only \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e2006-2007 ECU \u003cbr\u003eThe 2006-2007 V10 ECU contains an 8 pin expansion connector. \u003cbr\u003eThe following expansion connector inputs\/outputs are provided: \u003cbr\u003eAux 11                Auxiliary Output \u003cbr\u003eAn Temp 4        Temperature sensor input \u003cbr\u003eAux 12                Auxiliary Output \u003cbr\u003eVolt 11                Analog 0-5V input \u003cbr\u003eAux 13                Auxiliary Output \u003cbr\u003eDI 11                Digital Input \u003cbr\u003e+5V Out        Low Current +5V Supply \u003cbr\u003eGnd                Sensor Ground Only  \u003cbr\u003e\u003c\/p\u003e","brand":"Rapid Performance","offers":[{"title":"Default Title","offer_id":49304622498034,"sku":null,"price":2984.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0632\/3201\/6626\/files\/WRXLINKV10.avif?v=1779922437"},{"product_id":"wrxlink-04-wrx104x","title":"WRXLink (04) - WRX104X","description":"\u003cp\u003eSKU 224-4000\u003cbr\u003eEasy to install. Affordable. Reliable.\u003cbr\u003eThe Link G4X PlugIn ECU transforms your WRX into a precision-tuned performance machine. Enjoy the latest in engine management technology, fitted directly into your OEM enclosure with no loom modifications required.\u003c\/p\u003e\n\u003cp\u003eChoose the Right Model – Pin Check Required!\u003cbr\u003eThe fastest and most reliable way to confirm you need the WRX104X is to check pins A1–A3 on the OEM connector:\u003c\/p\u003e\n\u003cp\u003ePins A1–A3 have wires → You need the WRX104X (this listing, 224-4000)\u003cbr\u003ePins A1–A3 are empty → You need the WRX107X.\u003cbr\u003eWRX104X mostly covers 2004–2006; some late-2006 cars require the WRX107X, so this check is essential.\u003c\/p\u003e\n\u003cp\u003eVehicle Compatibility:\u003cbr\u003eDesigned for WRX V10 EJ25 (2.5L) 2004–2007\u003cbr\u003eManual transmission only\u003cbr\u003eSuits GD\/GG chassis with electronic throttle\u003cbr\u003eNot suitable for GR\/GH\/GE\/GV hatchback or 3rd generation WRX\u003cbr\u003eModel breakdown:\u003cbr\u003eWRX104X → Mostly covers 2004–2006  \u003cbr\u003eWRX107X → Mostly covers 2007 and some late 2006\u003c\/p\u003e\n\u003cp\u003eWhy Choose Link G4X?\u003c\/p\u003e\n\u003cp\u003eFactory fit, motorsport power – installs in the OEM case with world-class tuning flexibility.\u003cbr\u003ePlug \u0026amp; play – no wiring loom alterations for supported models.\u003cbr\u003eConfidence \u0026amp; reliability – proven hardware and software, trusted by tuners worldwide.\u003cbr\u003eSerious features – advanced boost control, antilag, launch, knock control \u0026amp; more.\u003c\/p\u003e\n\u003cp\u003eG4X PlugIn Key Features (where applicable):\u003cbr\u003eUp to 6D fuel and ignition mapping\u003cbr\u003ePrecision closed loop cam control (four cam, independent control)\u003cbr\u003eSequential fuel delivery\u003cbr\u003eDigital triggering, all OEM patterns\u003cbr\u003eOEM idle hardware supported\u003cbr\u003e5D boost control with three switchable tables\u003cbr\u003eMotorsport features - antilag, launch, flat shift\u003cbr\u003eContinuous barometric correction (on board)\u003cbr\u003eCAN port\u003cbr\u003eQuickTune - automated fuel tuning\u003cbr\u003eIndividual cylinder correction\u003cbr\u003eUSB tuning cable included\u003cbr\u003eStats recording into on-board memory\u003cbr\u003eGear compensations for spark, boost and fuel\u003cbr\u003eReal time selectable dual fuel, ignition and boost maps\u003cbr\u003eSync and crank sensors can be a combination of Hall effect, variable reluctance or optical\u003cbr\u003eBoost control referenced to gear, speed or throttle position\u003cbr\u003e512 mega bytes data logging memory within data storage unit\u003cbr\u003eStaged injection\u003cbr\u003eKnock with \"windowing\"\u003c\/p\u003e\n\u003cp\u003eThere are two different options for the expansion connectors, depending on whether your ECU is the 2004-2006 ECU or the 2006-2007 ECU. \u003c\/p\u003e\n\u003cp\u003e2004-2006 ECU \u003cbr\u003eThe following expansion connector inputs\/outputs are provided: \u003cbr\u003eBlank                AN Volt 11 \u003cbr\u003eAn Temp 4        Temperature sensor input \u003cbr\u003eBlank                No function \u003cbr\u003eBlank                AN Volt 12 \u003cbr\u003eBlank                No function \u003cbr\u003eBlank                No function \u003cbr\u003e+5V Out        Low Current +5V Supply \u003cbr\u003eGnd                Sensor Ground Only \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e2006-2007 ECU \u003cbr\u003eThe 2006-2007 V10 ECU contains an 8 pin expansion connector. \u003cbr\u003eThe following expansion connector inputs\/outputs are provided: \u003cbr\u003eAux 11                Auxiliary Output \u003cbr\u003eAn Temp 4        Temperature sensor input \u003cbr\u003eAux 12                Auxiliary Output \u003cbr\u003eVolt 11                Analog 0-5V input \u003cbr\u003eAux 13                Auxiliary Output \u003cbr\u003eDI 11                Digital Input \u003cbr\u003e+5V Out        Low Current +5V Supply \u003cbr\u003eGnd                Sensor Ground Only  \u003c\/p\u003e","brand":"Rapid Performance","offers":[{"title":"Default Title","offer_id":49314339062002,"sku":null,"price":2984.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0632\/3201\/6626\/files\/ECUPluginG4XWRX104.0.avif?v=1779929702"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0632\/3201\/6626\/collections\/Link_Subaru.png?v=1774927948","url":"https:\/\/www.rapidperformance.co.nz\/collections\/subaru.oembed","provider":"Rapid Performance","version":"1.0","type":"link"}