{"title":"Nissan","description":"","products":[{"product_id":"300zlink-n300x","title":"300ZLink - N300X","description":"\u003cp\u003eSKU 213-4000\u003cbr\u003eEasy to install. Affordable. Reliable.  \u003cbr\u003eG4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car.  \u003cbr\u003eThis ECU fits inside the factory OEM enclosure. Installation is a breeze, with no alteration of the factory wiring loom required for the models listed below. \u003c\/p\u003e\n\u003cp\u003eThe N300X ECU is Designed to suit the VG30DET engine.  \u003cbr\u003e \u003cbr\u003ePlease check your connector matches the header in the listed photo before purchasing.  \u003cbr\u003eThis ECU works for manual transmissions only.  \u003cbr\u003eIncludes an onboard 4 bar or 7 bar MAP sensor. \u003cbr\u003eMost factory features are supported. \u003cbr\u003eIt is highly recommended to fit an IAT sensor with this model.\u003cbr\u003eCheck the features tab for I\/O expansion options. \u003cbr\u003eThis ECU will need a modification before E-Throttle is usable.\u003c\/p\u003e\n\u003cp\u003eSuitable applications:  \u003cbr\u003eZ32 300ZX VG30DE \u003cbr\u003eZ32 300ZX VG30DETT \u003c\/p\u003e\n\u003cp\u003eG4X PlugIn Key Features (where applicable):\u003cbr\u003eUp to 6D fuel and ignition mapping\u003cbr\u003ePrecision closed loop cam control (four cam, independent control)\u003cbr\u003eSequential fuel delivery\u003cbr\u003eDigital triggering, all OEM patterns\u003cbr\u003eOEM idle hardware supported\u003cbr\u003e5D boost control with three switchable tables\u003cbr\u003eMotorsport features - antilag, launch, flat shift\u003cbr\u003eContinuous barometric correction (on board)\u003cbr\u003eCAN port\u003cbr\u003eQuickTune - automated fuel tuning\u003cbr\u003eIndividual cylinder correction\u003cbr\u003eUSB tuning cable included\u003cbr\u003eStats recording into on-board memory\u003cbr\u003eGear compensations for spark, boost and fuel\u003cbr\u003eReal time selectable dual fuel, ignition and boost maps\u003cbr\u003eSync and crank sensors can be a combination of Hall effect, variable reluctance or optical\u003cbr\u003eBoost control referenced to gear, speed or throttle position\u003cbr\u003e512 mega bytes data logging memory\u003cbr\u003eStaged injection\u003cbr\u003eKnock with \"windowing\"\u003c\/p\u003e\n\u003cp\u003eI\/O Expansion Options:\u003cbr\u003eThe following expansion connector inputs\/outputs are provided: \u003cbr\u003eExpansion connector 1 \u003cbr\u003eGND                Sensor Ground Only  \u003cbr\u003e+5V Out        Low Current +5V Supply \u003cbr\u003eDI 5                Digital Input \u003cbr\u003eDI 6                Digital Input \u003cbr\u003eVolt 8                Analog Volt Input \u003cbr\u003eVolt 7                Analog Volt Input \u003cbr\u003eTemp 3                Analog Temp Input \u003cbr\u003eTemp 4                Analog Temp Input \u003c\/p\u003e\n\u003cp\u003eExpansion Connector 2 \u003cbr\u003eGnd                Sensor Ground Only  \u003cbr\u003e+5V Out        Low Current +5V Supply \u003cbr\u003eIgn 7                Ignition 7 Auxiliary Output \u003cbr\u003eIgn 8                Ignition 8 Auxiliary Output \u003cbr\u003eDI 7                Digital Input \u003cbr\u003eDI 8                Digital Input \u003cbr\u003eAn Volt 9        Analog 0-5V input \u003cbr\u003eAn Volt 10        Analog 0-5V input \u003cbr\u003e\u003c\/p\u003e","brand":"Rapid Performance","offers":[{"title":"Default Title","offer_id":49302298394866,"sku":null,"price":2754.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0632\/3201\/6626\/files\/300ZXG4XN300.0.avif?v=1779920633"},{"product_id":"s13link-ns13x-76-pin","title":"S13Link - NS13X - 76 pin","description":"\u003cp\u003eSKU 216-4000\u003cbr\u003eEasy to install. Affordable. Reliable.  \u003cbr\u003eG4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car.  \u003cbr\u003eThis ECU fits inside the factory OEM enclosure. Installation is a breeze, with no alteration of the factory wiring loom required for the models listed below. \u003c\/p\u003e\n\u003cp\u003eDesigned for the SR20 and CA18 engines, that use the 76 pin Blue ECU Header.  \u003c\/p\u003e\n\u003cp\u003ePlease check your connector matches the header in the listed photo before purchasing.  \u003cbr\u003eThis ECU works for manual transmissions only.  \u003cbr\u003eIt includes an onboard 4 bar or 7 bar MAP sensor. \u003cbr\u003eMost factory features are supported. \u003cbr\u003eCheck the features tab for I\/O expansion options. \u003cbr\u003eThis ECU will need a modification before E-Throttle is usable.\u003c\/p\u003e\n\u003cp\u003eSuitable applications:  \u003cbr\u003eNissan S13 CA18DET \u003cbr\u003eNissan 180SX CA18DET   \u003cbr\u003eNissan S14 (pre facelift) SR20DET  \u003c\/p\u003e\n\u003cp\u003eG4X PlugIn Key Features (where applicable):\u003cbr\u003eUp to 6D fuel and ignition mapping\u003cbr\u003ePrecision closed loop cam control (four cam, independent control)\u003cbr\u003eSequential fuel delivery\u003cbr\u003eDigital triggering, all OEM patterns\u003cbr\u003eOEM idle hardware supported\u003cbr\u003e5D boost control with three switchable tables\u003cbr\u003eMotorsport features - antilag, launch, flat shift\u003cbr\u003eContinuous barometric correction (on board)\u003cbr\u003eCAN port\u003cbr\u003eQuickTune - automated fuel tuning\u003cbr\u003eIndividual cylinder correction\u003cbr\u003eUSB tuning cable included\u003cbr\u003eStats recording into on-board memory\u003cbr\u003eGear compensations for spark, boost and fuel\u003cbr\u003eReal time selectable dual fuel, ignition and boost maps\u003cbr\u003eSync and crank sensors can be a combination of Hall effect, variable reluctance or optical\u003cbr\u003eBoost control referenced to gear, speed or throttle position\u003cbr\u003e512 mega bytes data logging memory\u003cbr\u003eStaged injection\u003cbr\u003eKnock with \"windowing\"\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eI\/O Expansion Options:\u003cbr\u003eThe following expansion connector inputs\/outputs are provided: \u003cbr\u003eExpansion Connector 1 \u003cbr\u003eGnd                Sensor Ground Only  \u003cbr\u003e+5V Out        Low Current +5V Supply \u003cbr\u003eDI 5                Digital Input \u003cbr\u003eDI 6                Digital Input \u003cbr\u003eDI 7                Digital Input \u003cbr\u003eAn Volt 6        Analog 0-5V input \u003cbr\u003eAn Temp 4        Temperature sensor input \u003cbr\u003eAn Temp 3        Temperature sensor input \u003c\/p\u003e\n\u003cp\u003eExpansion connector 2  \u003cbr\u003eIgn 5                Ignition 5 Auxiliary Output \u003cbr\u003eIgn 6                Ignition 6 Auxiliary Output \u003cbr\u003eIgn 7                Ignition 7 Auxiliary Output \u003cbr\u003eIgn 8                Ignition 8 Auxiliary Output \u003cbr\u003eVolt 8                Analog 0-5V input \u003cbr\u003eVolt 9                Analog 0-5V input \u003cbr\u003eVolt 10                Analog 0-5V input \u003cbr\u003eVolt 11                Analog 0-5V input \u003cbr\u003e\u003c\/p\u003e","brand":"Rapid Performance","offers":[{"title":"Default Title","offer_id":49302419636466,"sku":null,"price":2984.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0632\/3201\/6626\/files\/S13LINKNS13X.avif?v=1779920763"},{"product_id":"s15link-ns15x","title":"S15Link - NS15X","description":"\u003cp\u003eSKU 217-4100\u003cbr\u003eEasy to install. Affordable. Reliable. \u003cbr\u003eG4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car.  \u003cbr\u003eThis ECU fits inside the factory OEM enclosure. Installation is a breeze, with no alteration of the factory wiring loom required for the models listed below. \u003c\/p\u003e\n\u003cp\u003eDesigned for the SR20 engine. This ECU will work with the 64 pin, blue header plug ECU version. \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003ePlease check your connector matches the header in the listed photo before purchasing.  \u003cbr\u003eThis ECU works for manual transmissions only.  \u003cbr\u003eECU includes an onboard 7 bar MAP sensor. \u003cbr\u003eMost factory features are supported. \u003cbr\u003eCheck the features tab for I\/O expansion options.\u003cbr\u003eThis ECU now includes E-Throttle as standard.\u003cbr\u003eNow with 4 pin powered CAN connector (See note below).\u003c\/p\u003e\n\u003cp\u003eSuitable Applications:  \u003cbr\u003eS13 Silvia \/ 180SX SR20DET (but not CA18DET) \u003cbr\u003eS14a Silvia (facelift) SR20DET \u003cbr\u003eS15 Silvia SR20DET \u003cbr\u003eS15 Silvia SR20DE \u003cbr\u003eRNN14 Pulsar GTI-R SR20DET \u003cbr\u003eN15 Pulsar SR16VE \u003cbr\u003eN14 Distributed \u003cbr\u003e*For the 76 pin header ECU, have a look at the S13X PlugIn listing.  \u003c\/p\u003e\n\u003cp\u003eNote: This Plug-in features a new 4 pin powered CAN connector and cannot use the old CANPCB cable for CAN connection.  Use the CANJST4 (Code 101-0198) cable for connecting CAN devices.  This new 4 pin port and cable provide not only the CAN connection, but also a protected 12V power supply and ground for powering the CAN devices.  The power supply is protected by a self-resetting fuse rated at 3A continuous.\u003c\/p\u003e\n\u003cp\u003eUp to 6D fuel and ignition mapping\u003cbr\u003ePrecision closed loop cam control (four cam, independent control)\u003cbr\u003eSequential fuel delivery\u003cbr\u003eDigital triggering, all OEM patterns\u003cbr\u003eOEM idle hardware supported\u003cbr\u003e5D boost control with three switchable tables\u003cbr\u003eMotorsport features - antilag, launch, flat shift\u003cbr\u003eContinuous barometric correction (on board)\u003cbr\u003eCAN port\u003cbr\u003eQuickTune - automated fuel tuning\u003cbr\u003eIndividual cylinder correction\u003cbr\u003eUSB tuning cable included\u003cbr\u003eStats recording into on-board memory\u003cbr\u003eGear compensations for spark, boost and fuel\u003cbr\u003eReal time selectable dual fuel, ignition and boost maps\u003cbr\u003eSync and crank sensors can be a combination of Hall effect, variable reluctance or optical\u003cbr\u003eBoost control referenced to gear, speed or throttle position\u003cbr\u003e512 mega bytes data logging memory\u003cbr\u003eStaged injection\u003cbr\u003eKnock with \"windowing\"\u003c\/p\u003e\n\u003cp\u003eI\/O Expansion Options:\u003cbr\u003eThe following expansion connector inputs\/outputs are provided: \u003c\/p\u003e\n\u003cp\u003eOn Board MAP - An Volt 3 \u003cbr\u003eE-Throttle Relay - Aux 12\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eExpansion connectors\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eExpansion 1 - Signal Ground \u003cbr\u003eExpansion 2 - +5V Out \u003cbr\u003eExpansion 3 - An Volt 5 \u003cbr\u003eExpansion 4 - An Volt 6 \u003cbr\u003eExpansion 5 - An Volt 7 \u003cbr\u003eExpansion 6 - An Volt 8 \u003cbr\u003eExpansion 7 - Aux 9 \u003cbr\u003eExpansion 8 - Aux 10 \u003cbr\u003eExpansion 9 - Signal Ground \u003cbr\u003eExpansion 10 - +5V Out \u003cbr\u003eExpansion 11 - Aux 11 \u003cbr\u003eExpansion 12 - DI 6 \u003cbr\u003eExpansion 13 - DI 7 \u003cbr\u003eExpansion 14 - An Volt 9 \u003cbr\u003eExpansion 15 - An Temp 3 \u003cbr\u003eExpansion 16 - An Temp 4\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Rapid Performance","offers":[{"title":"Default Title","offer_id":49302610903282,"sku":null,"price":2984.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0632\/3201\/6626\/files\/ECUPluginG4XNS15.0.avif?v=1779920939"},{"product_id":"gttlink-ngttx","title":"GTTLink - NGTTX","description":"\u003cp\u003eSKU 215-4000\u003cbr\u003eEasy to install. Affordable. Reliable.  \u003cbr\u003eG4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car.  \u003cbr\u003eThis ECU fits inside the factory OEM enclosure. Installation is a breeze, with no alteration of the factory wiring loom required for the models listed below. \u003c\/p\u003e\n\u003cp\u003eThe NGTTX is Designed to suit the grey plug RB (typically neo) engine.  \u003c\/p\u003e\n\u003cp\u003ePlease check your connector matches the header in the listed photo before purchasing.  \u003cbr\u003eThis ECU works for manual transmissions only.  \u003cbr\u003eMost factory features are supported. \u003cbr\u003eNote: This ECU does not currently output the 4WD signal required for proper 4wd operation in 4WD Stageas and Skylines. \u003cbr\u003eNote: Models fitted with factory traction control - TCS will no longer function, the TCS and slip lamps will be illuminated.\u003cbr\u003eCheck the features tab for I\/O expansion options.\u003cbr\u003eThis ECU will need a modification before E-Throttle is usable. \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eSuitable applications: \u003c\/p\u003e\n\u003cp\u003eRB20DE NEO, RB25DE NEO and RB25DET NEO in R34 Skylines\u003cbr\u003eRB20DE NEO, RB25DE NEO and RB25DET NEO in C35 Laurels \u003cbr\u003eRB20DE NEO, RB25DE NEO and RB25DET NEO in Nissan Stageas\u003cbr\u003e- Plus, non neo motors in Stageas\u003c\/p\u003e\n\u003cp\u003eG4X PlugIn Key Features (where applicable):\u003cbr\u003eUp to 6D fuel and ignition mapping\u003cbr\u003ePrecision closed loop cam control (four cam, independent control)\u003cbr\u003eSequential fuel delivery\u003cbr\u003eDigital triggering, all OEM patterns\u003cbr\u003eOEM idle hardware supported\u003cbr\u003e5D boost control with three switchable tables\u003cbr\u003eMotorsport features - antilag, launch, flat shift\u003cbr\u003eContinuous barometric correction (on board)\u003cbr\u003eCAN port\u003cbr\u003eQuickTune - automated fuel tuning\u003cbr\u003eIndividual cylinder correction\u003cbr\u003eUSB tuning cable included\u003cbr\u003eStats recording into on-board memory\u003cbr\u003eGear compensations for spark, boost and fuel\u003cbr\u003eReal time selectable dual fuel, ignition and boost maps\u003cbr\u003eSync and crank sensors can be a combination of Hall effect, variable reluctance or optical\u003cbr\u003eBoost control referenced to gear, speed or throttle position\u003cbr\u003e512 mega bytes data logging memory\u003cbr\u003eStaged injection\u003cbr\u003eKnock with \"windowing\"\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eI\/O Expansion Options:\u003cbr\u003eThe following expansion connector inputs\/outputs are provided: \u003cbr\u003eExpansion connector 1  \u003cbr\u003eSGnd                Sensor Ground Only  \u003cbr\u003e+5V Out        Low Current +5V Supply \u003cbr\u003eDI 7                Digital Input \u003cbr\u003eDI 8                Digital Input \u003cbr\u003eAn Volt 10        Analog 0-5V input \u003cbr\u003eAn Volt 9        Analog 0-5V input \u003cbr\u003eIgn 7                Ignition 7 Auxiliary Output \u003cbr\u003eIgn 8                Ignition 8 Auxiliary Output \u003c\/p\u003e\n\u003cp\u003eExpansion connector 2  \u003cbr\u003eSGnd                Sensor Ground Only  \u003cbr\u003e+5V Out        Low Current +5V Supply \u003cbr\u003eDI 5                Digital Input \u003cbr\u003eDI 6                Digital Input \u003cbr\u003eAn Volt 5        Analog 0-5V input \u003cbr\u003eAn Volt 6        Analog 0-5V input \u003cbr\u003eAn Temp 2        Temperature sensor input \u003cbr\u003eAn Temp 3        Temperature sensor input \u003c\/p\u003e\n\u003cp\u003ePin 108 – OBD1 wire now used for IAT on Temp 4. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Rapid Performance","offers":[{"title":"Default Title","offer_id":49302720381170,"sku":null,"price":2984.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0632\/3201\/6626\/files\/ECUPluginG4XNGTT.0.avif?v=1779921034"},{"product_id":"gtrlink-ngtrx-bundle","title":"GTRLink - NGTRX Bundle","description":"\u003cp\u003eSKU 214-9800B\u003cbr\u003eThe perfect package to upgrade your Nissan GTR.\u003c\/p\u003e\n\u003cp\u003eThe G4X NGTRX ECU is a direct replacement for your factory ECU. Combined with the XS Loom, CANJST4 and CAN LAMBDA this is a simple and cost-effective solution for improving the performance and expanding the capabilities of your car.\u003cbr\u003eThe NGTRX is Designed to suit the blue plug Nissan RB engine. Please check the Nissan GTRX ECU listing for more detail and to ensure this is the correct ECU for your car.   \u003cbr\u003eNGTRX Plug-in ECU with E-Throttle  - all the features of a Link G4X XtremeX ECU, but in plug-in form that fits into the OEM ECU enclosure.\u003cbr\u003eXS Loom - allows for additional inputs\/outputs for your plug-in ECU.\u003cbr\u003eCan Lambda - an easy to use CAN module that provides digital wideband sensor control via CAN bus.\u003cbr\u003eCANJST4 – Cable for G4X Plug-in ECUs, provides CAN communications and a protected 12V supply for powering and communicating with accessories such as the CAN Lambda, Dash, or EGT amplifier\u003c\/p\u003e\n\u003cp\u003eBundle includes:\u003c\/p\u003e\n\u003cp\u003eNGTR ECU    214-4100\u003cbr\u003eXSL    101-0106\u003cbr\u003eCANLAM    125-1000\u003cbr\u003eCANJST4    101-0198\u003cbr\u003e\u003c\/p\u003e","brand":"Rapid Performance","offers":[{"title":"Default Title","offer_id":49302870982898,"sku":null,"price":3680.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0632\/3201\/6626\/files\/GTRXBUNDLE.avif?v=1779921151"},{"product_id":"gtrlink-ngtrx","title":"GTRLink - NGTRX","description":"\u003cp\u003eSKU 214-4100\u003cbr\u003eEasy to install. Affordable. Reliable.  \u003cbr\u003eG4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car.  \u003cbr\u003eThis ECU fits inside the factory OEM enclosure. Installation of the processing unit is a breeze, with no alteration of the factory wiring loom required for the models listed below.  \u003c\/p\u003e\n\u003cp\u003eThe NGTRX is Designed to suit the blue plug Nissan RB engine.  \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003ePlease check your connector matches the header in the listed photo before purchasing.  \u003cbr\u003eThis ECU works for manual transmissions only.  \u003cbr\u003eThis model includes an onboard 4 bar or 7 bar MAP sensor. \u003cbr\u003eMost factory features are supported. \u003cbr\u003eThis ECU includes support for E-Throttle (Drive-by-Wire) \u003cbr\u003eNow with 4 pin powered CAN connector (See note below).\u003c\/p\u003e\n\u003cp\u003eSuitable applications for 214-4100 automotive computer unit:  \u003cbr\u003eRB26DETT engines found in R32, R33, R34 Skyline GTRs and Autech 260RS Stageas \u003cbr\u003eRB20DE engines found in R32 \u0026amp; R33 Skylines, A31 Cefiros  \u003cbr\u003eRB20DET engines found in R32 Skylines (incl 4wd), A31 Cefiros and C33 Laurels. – Injector 4\u0026amp;6 need swapping \u003cbr\u003eRB25DE engines found in R32 \u0026amp; R33 Skylines, C33 \u0026amp; C34 Laurels and A31 Cefiros. \u003cbr\u003eRB25DET engines found in R33 Skylines (incl 4wd) and C34 Laurels \u003cbr\u003eRB30DE\/DET\/DETT engines made using Non Neo heads and blue plug looms \u003c\/p\u003e\n\u003cp\u003eNote: This Plug-in features a new 4 pin powered CAN connector and cannot use the old CANPCB cable for CAN connection.  Use the CANJST4 (Code 101-0198) cable for connecting CAN devices.  This new 4 pin port and cable provide not only the CAN connection, but also a protected 12V power supply and ground for powering the CAN devices.  The power supply is protected by a self-resetting fuse rated at 3A continuous.\u003c\/p\u003e\n\u003cp\u003eG4X PlugIn Key Features (where applicable):\u003cbr\u003eUp to 6D fuel and ignition mapping\u003cbr\u003ePrecision closed loop cam control (four cam, independent control)\u003cbr\u003eSequential fuel delivery\u003cbr\u003eDigital triggering, all OEM patterns\u003cbr\u003eOEM idle hardware supported\u003cbr\u003e5D boost control with three switchable tables\u003cbr\u003eMotorsport features - antilag, launch, flat shift\u003cbr\u003eContinuous barometric correction (on board)\u003cbr\u003eCAN port\u003cbr\u003eQuickTune - automated fuel tuning\u003cbr\u003eIndividual cylinder correction\u003cbr\u003eUSB tuning cable included\u003cbr\u003eStats recording into on-board memory\u003cbr\u003eGear compensations for spark, boost and fuel\u003cbr\u003eReal time selectable dual fuel, ignition and boost maps\u003cbr\u003eSync and crank sensors can be a combination of Hall effect, variable reluctance or optical\u003cbr\u003eBoost control referenced to gear, speed or throttle position\u003cbr\u003e512 mega bytes data logging memory within data processing unit\u003cbr\u003eStaged injection\u003cbr\u003eKnock with \"windowing\"\u003c\/p\u003e\n\u003cp\u003eI\/O Expansion Options:\u003cbr\u003eThe following expansion connector inputs\/outputs are provided: \u003cbr\u003eExpansion connector 1  \u003cbr\u003eGnd                Sensor Ground Only  \u003cbr\u003e+5V Out        Low Current +5V Supply \u003cbr\u003eDI5                Digital Input \u003cbr\u003eDI6                Digital Input \u003cbr\u003eAn Volt 8        Analog 0-5V input \u003cbr\u003eAn Volt 2        Analog 0-5V input \u003cbr\u003eAn Temp 3        Temperature sensor input \u003cbr\u003eAn Temp 4        Temperature sensor input \u003c\/p\u003e\n\u003cp\u003eExpansion connector 2 \u003cbr\u003eGnd                Sensor Ground Only  \u003cbr\u003e+5V Out        Low Current +5V Supply \u003cbr\u003eIgn 7                Ignition 7 Auxiliary Output \u003cbr\u003eIgn 8                Ignition 8 Auxiliary Output \u003cbr\u003eDI 9                Digital Input \u003cbr\u003eDI 10                Digital Input \u003cbr\u003eAn Volt 10        Analog 0-5V input \u003cbr\u003eAux 11                Auxiliary Output 11\u003c\/p\u003e","brand":"Rapid Performance","offers":[{"title":"Default Title","offer_id":49302983114994,"sku":null,"price":2984.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0632\/3201\/6626\/files\/GTRLINK.avif?v=1779921271"},{"product_id":"350zlink-n350x","title":"350ZLink - N350X","description":"\u003cp\u003eSKU 210-4000\u003cbr\u003eEasy to install. Affordable. Reliable.  \u003cbr\u003eG4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car.  \u003cbr\u003eThis ECU comes in its own enclosure, while installation is a breeze with no alteration of the factory wiring loom required for the models listed below. \u003c\/p\u003e\n\u003cp\u003eThe N350X ECU is Designed to suit the VQ35DE engine. \u003c\/p\u003e\n\u003cp\u003ePlease check your connector matches the header in the listed photo before purchasing.  \u003cbr\u003eThis ECU works with manual AND automatic transmissions.  \u003cbr\u003eECU includes an onboard 4 bar or 7 bar MAP sensor.  \u003cbr\u003eMost factory features are supported. \u003cbr\u003eCheck the features tab for I\/O expansion options \u003cbr\u003eHighly recommended to fit an IAT sensor. \u003c\/p\u003e\n\u003cp\u003eSuitable applications:  \u003cbr\u003e2002 to 2006 Nissan 350Z (Fairlady Z Z33) \u003cbr\u003e2003 to 2006 Nissan Skyline V35 \u003cbr\u003e2003 to 2006 Infinity G35  \u003c\/p\u003e\n\u003cp\u003eG4X PlugIn Key Features (where applicable):\u003c\/p\u003e\n\u003cp\u003eUp to 6D fuel and ignition mapping\u003cbr\u003ePrecision closed loop cam control (four cam, independent control)\u003cbr\u003eSequential fuel delivery\u003cbr\u003eDigital triggering, all OEM patterns\u003cbr\u003eOEM idle hardware supported\u003cbr\u003e5D boost control with three switchable tables\u003cbr\u003eMotorsport features - antilag, launch, flat shift\u003cbr\u003eContinuous barometric correction (on board)\u003cbr\u003eCAN port\u003cbr\u003eQuickTune - automated fuel tuning\u003cbr\u003eIndividual cylinder correction\u003cbr\u003eUSB tuning cable included\u003cbr\u003eStats recording into on-board memory\u003cbr\u003eGear compensations for spark, boost and fuel\u003cbr\u003eReal time selectable dual fuel, ignition and boost maps\u003cbr\u003eSync and crank sensors can be a combination of Hall effect, variable reluctance or optical\u003cbr\u003eBoost control referenced to gear, speed or throttle position\u003cbr\u003e512 mega bytes data logging memory\u003cbr\u003eStaged injection\u003cbr\u003eKnock with \"windowing\"\u003c\/p\u003e\n\u003cp\u003eI\/O Expansion Options:\u003cbr\u003eThe following expansion connector inputs\/outputs are provided: \u003cbr\u003eExpansion connector 1  \u003cbr\u003eGnd                Sensor Ground Only  \u003cbr\u003e+5V                Low Current +5V Supply \u003cbr\u003eAux 15                Auxiliary Output \u003cbr\u003eAux 14                Auxiliary Output \u003cbr\u003eDI 8                Digital Input \u003cbr\u003eDI 9                Digital Input \u003cbr\u003eAn Volt 8        Analog 0-5V input \u003c\/p\u003e\n\u003cp\u003eExpansion connector 2  \u003cbr\u003eAn Temp 4        Temperature sensor input \u003cbr\u003eDI 11                Digital Input \u003cbr\u003eAux 16                Auxiliary Output \u003cbr\u003eAux 8                Auxiliary Output \u003cbr\u003e+5V                Low Current +5V Supply \u003cbr\u003eGnd                Sensor Ground Only \u003c\/p\u003e","brand":"Rapid Performance","offers":[{"title":"Default Title","offer_id":49303123624178,"sku":null,"price":2754.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0632\/3201\/6626\/files\/35OZLINK.avif?v=1779921391"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0632\/3201\/6626\/collections\/Link_Nissan.png?v=1774927928","url":"https:\/\/www.rapidperformance.co.nz\/collections\/nissan.oembed","provider":"Rapid Performance","version":"1.0","type":"link"}